Setting up your Stick Up Cam Wired in your Ring app

To download the Ring app:

* On your mobile device, go to the

(for iOS devices) or the

(for Android devices).

* Search for “Ring.”

* Download and install the Ring app on your mobile device.

Or visit ring.com/app on your mobile device

If this is your first Ring product, you will be asked to set up an account.

To set up an account:

* Open the Ring app.

* Select “Create Account.”

* Follow the in-app instructions to create a new account.

If you already have another Ring device installed, simply open the Ring app.

Tap “Set Up a Device” then select “Security Cams.”

The QR code and MAC ID barcode can be found under the bottom cover of your Stick Up Cam Wired.

* Point the camera on your smartphone at the QR code or MAC ID barcode on your Stick Up Cam.

* This code can also be found on the product packaging or on the Quick Start Guide that came with your device.

* Center the code in the phone camera’s view at the top of the screen.

* Once the code is recognised, a green square (for QR code) or a green line (MAC ID barcode) will appear, and the setup will proceed to the next step.

Note: If you experience issues with scanning the QR code or MAC ID barcode, you can select “Set Up Without Scanning” and select “Stick Up Cam Wired” to continue through the setup process.

If this is your first time setting up a Ring device, you will receive a request from your phone informing you that the Ring app wishes to use your phone’s location services to pinpoint your location. Allowing the app to do so will assist with inputting your address.

Enter your address information into the app, then confirm it.

If you have established a location previously, you can select it from the list of your locations.

Note: Without a specific location, certain features of your Stick Up Cam will not work properly.

.

Select either “Indoors” or “Outdoors”, based on where you plan to install your Stick Up Cam.

If you chose “Indoors,” select whether or not your Stick Up Cam will be facing a window.

Select a specific name for your Stick Up Cam Wired to distinguish it from other Ring devices on your account. You can choose one of the default names that are suggested, or you can enter your own by selecting “Custom…” at the bottom of the list.

You can power Stick Up Cam in one of two ways:

* Plug it into a socket (with USB)

* Plug it into an Ethernet using the PoE adaptor. 

Your Stick Up Cam will enter Setup mode after being plugged in. When the light on the front of your Stick Up Cam begins flashing blue, tap “The Light is Flashing” in your Ring app to continue to the next step.

If your Stick Up Cam does not go into Setup mode automatically after powering on, press and release the orange button under the bottom cover of your Stick Up Cam Wired.

Your Stick Up Cam can connect to the internet in two different ways:

* Ethernet

* Wifi

Using Ethernet to connect your Stick Up Cam requires an Ethernet cable and a working Ethernet port.

* If your Stick Up Cam is powered with the PoE Adaptor and connected to your router, your device can use this connection to connect to the internet via Ethernet. 

* You can also connect via wifi if you are not able to connect the PoE Adaptor to your router.

* If your Stick Up Cam is powered with USB, you can still use Ethernet to connect your device to the internet by connecting your Stick Up Cam to Ethernet in addition to USB.

If you do not have an Ethernet connection, or would prefer to connect to the wifi in your home, select

in your Ring app.

iOS: Tap

when the Ring app asks to join the Ring wifi network.

Android: Your device should automatically connect to the Ring wifi network.

If your device does not automatically connect to the Ring wifi network, or if you chose to continue without scanning in step four, please follow the steps below:

* Press the home button on your phone to leave the Ring app.

* Navigate to the

app, then tap

* On Android, you may need to navigate to

then

* Select the Ring wifi network from the list of available networks. The network will appear as either:

* “Ring-” followed by the last six digits of the MAC ID.

* “Ring Setup” followed by the last two digits of the MAC ID.

* Once connected, close your “Settings” app and return to the Ring app.

If you are using Ethernet to connect your Stick Up Cam to the internet, you can skip this step and proceed to step thirteen.

If you are using wifi to connect your Stick Up Cam to the internet, please follow the steps below:

Be sure you have your wifi password ready.

* Select your wifi network.

* If you have more than one wifi network, select the network closest to where you will be installing your Stick Up Cam.

* Enter your wifi password and press

Note: After connecting to the internet, your Stick Up Cam may update its internal software. While performing an update, the light on the front of your device will flash blue. When the blue light stops flashing, you can tap “Continue” in the Ring app and begin using your Stick Up Cam.

Once your Stick Up Cam has completed its update and setup, configure your Stick Up Cam’s motion zones, then open Live View to test your camera.