Installing your Stick up Cam Battery on the ceiling

Installing your Stick Up Cam Battery on the ceiling is simple. Scroll down for a step-by-step guide.

1. Charge the provided battery

First, fully charge the provided battery by plugging it onto a USB Power source using the provided orange cable.

The battery is fully charged when just one LED is lit.

2. Remove the battery cover

Twist the battery cover counterclockwise to unlock, then remove it from your Stick Up Cam.

3. Choose a location

Stick Up Cam is happy just about anywhere. Choose the spot where it can provide the view you want.

4. Remove the base

Unscrew it using a standard Philips-head screwdriver.

5. Attach the Stick Up Cam Mount 

Attach the smaller end of the Stick Up Cam Mount to the rear of the Stick Up Cam. Screw it into place using the large silver screw that comes in your Stick Up Cam Mount packaging.

6. Attach the rubber pad

Be sure that the white rubber pad is attached to the base of the Stick Up Cam Mount. Otherwise attach it by pushing the rubber pad into the base of the mount.

7. Swivel the stand

Once you've attached the mount to the back of your Stick Up Cam, swivel the mount so that the base is above the camera. 

Note: You will not be able to change the orientation of upside-down videos in the Ring app. Make sure to install your camera the right way up.

8. Place the camera

Place the Stick Up Cam where you want to mount it, rubber side down.

9. Screw in the camera

Use the three mounting screws to secure the Stick Up Cam Mount base to the ceiling. 

Note: If you're installing your camera on masonry or stucco, use the enclosed drill bit to drill holes in the ceiling, then push the enclosed anchors into the holes.

10. Replace the cover

Slide the back cover of the Stick Up Cam back into place. Use the star-shaped end of the included screwdriver to tighten the attached screw.

11. Snap the cover onto the base 

Screw in the security screws if desired.