Search Results for Ring Help
Showing results for spin
Doorbell setup guide
...Press the setup button on the device. The light around the doorbell button will begin to spin. The setup button is located either under the faceplate or on the back of the doorbell. 2. Tap Light is Spinning White in the Ring app. iOS: When the Ring app asks to join the Ring wifi network, tap Join...
Keypad and Base Station LED Patterns Explained
...4 corner LEDs flashing blue five times tells you that there is a bluetooth pairing error. When you see a solid blue light with one green dot spinning clockwise, this notifies you that the Base Station is downloading a software update. A purple dot spinning clockwise indicates that the Base...
Understanding Ring Alarm Pro Base Station LED Light Patterns
...Solid White When internet is connected. LED ring patterns LED Color Description Blue LED spinning clockwise around the circle. When Bluetooth pairing has started. 4 corner LEDs flashing blue five times. When there is a Bluetooth pairing error...
Troubleshooting your Ring Intercom devices
...t go away. You might briefly see a spinning circle multiple times as you progress through the installation process in the Ring app. If the spinning circle spins for more than 15 seconds, try these steps: Make sure that your Ring Intercom device is connected to a reliable 2.4 GHz wifi network...
Understanding doorbell light patterns
...blue circle light is flashing : The doorbell is charging from 50-75%. Blue circle light is flashing : The doorbell is fully charged. White light spinning in a circle: Setup mode The doorbell is in setup mode. This light pattern times out after 10 minutes...
Setting up and registering your Base Station in the Ring app
...Press the pairing button on the back of your Base Station. When the blue LED light on top starts to spin, tap Find my Base Station . Connect your Base Station to the internet Your Base Station will need to connect to the internet via your wifi network...
Lennar Homeowner Support Guide
...Pro, remove the doorbell’s faceplate using the provided screwdriver. Press the button on the side of the doorbell and hold for 10 seconds. A spinning white light on the front of the device indicates the doorbell is now in Setup Mode...
Installing Wired Doorbell Elite (2nd Gen)
...9. Plug the Ethernet cable into the back of your doorbell. NOTE: When properly connected, the front light will begin spinning. 10. Tuck the wires into the wall, then hook your doorbell over the mounting bracket to attach. Wired Doorbell Elite (2nd Gen) | 6EN 11. Tighten...
Wired Doorbell Plus Setup Mode
...How do I know my Wired Doorbell Plus is in Setup Mode? You'll know your Wired Doorbell Plus is in Setup Mode when the light is spinning. The light on the Wired Doorbell Plus isn't lighting up. Is something wrong? There are two possible reasons why your light isn't working: You're...
Installing Video Doorbell Elite
...Plug the Ethernet cable into the Ethernet port on the back of the doorbell. When connected to power, the front light on the doorbell will begin spinning, indicating that the device is in setup mode...