Search Results for Ring Help
Showing results for fastened-feet
Installing Spotlight Cam Plus and Pro
Step 3: Select a location for your device We recommend mounting your camera 8 to 10 feet (2.5 to 3 meters) from the ground for optimal motion detection. Learn more about positioning your camera for optimal performance. Step 4: Choose your mounting plate orientation Your camera can be mounted on a wall, eave, or overhang using the adjustable mounting plate. Keep the rubber seal on the base to make sure it stays securely fastened. If installing on a wall: Your camera comes ready to mount, with the ball joint pointing down.
RecommendedInstalling Spotlight Cam Plus and Pro
...Step 3: Select a location for your device We recommend mounting your camera 8 to 10 feet (2.5 to 3 meters) from the ground for optimal motion detection. Learn more about positioning your camera for optimal performance. Step 4: Choose...
Positioning doorbells and security cameras
...mounted 8 to 10 feet (2.5 to 3 meters) from the ground with a 20-degree tilt for optimal performance. Cameras used indoors can be mounted up to 8 feet (2.5 meters) from the ground...
Installing Spotlight Cam (1st Gen), Mount
...with the motion detector parallel to the ground. This will put the motion sensor in a perfect position to detect human-sized objects at up to 30 feet. Also note that you'll need to decide whether you're going to be mounting your Spotlight Cam on the wall or on the ceiling. When mounting the...
Proper Positioning for Your Stick Up Cam (2nd Gen), Wired
...or outdoors, higher is usually better. Your Stick Up Cam will work fine at about eye-level, but raising it up to about 9 feet (outdoors) or 5-8 feet (indoors) will work even better...
Floodlight Cam Pro
...box, one can be installed. However, Ring highly recommends that you ask a licensed electrician for installation help. The optimal height is 9 feet from the ground, to get the best range for the motion detector...
ProductHardwired Kit for Spotlight Cam (1st Gen) Information
...the ground with the motion sensor parallel to the ground. At that height, the Spotlight Cam is optimized to detect human-sized objects at up to 30 feet...
Setting up and using Ring Alarm Motion Detector (all generations)
...Installation 1. Choose a location for installing your Motion Detector. a. For best coverage, install the Motion Detector at a height of between 7-8 feet b. It is recommended to install the Motion Detector on a wall or in a corner looking out onto an area to monitor. c. Ensure no large objects block...
Technical Specifications for Ring Alarm Devices
...We recommend: Mounting Motion Detector seven (7) feet off of the ground. Setting Motion Sensitivity to Low Detection in the Device’s Motion Settings. After installing, test your Motion Detector to...
Setting up and installing your Smart Lights Transformer
...Select a cable using this chart: 0-50 feet of wire 51-100 feet of wire 101-150 feet of wire 0-50 Watts - total light wattage 16 AWG 16 AWG 15 AWG 51-100 Watts - total light wattage 16 AWG 14 AWG 12 AWG 100-200 Watts - total...