Search Results for Ring Help
Showing results for anchor
Installing Wired Doorbell Plus
...Install the anchors. (optional) On stucco, brick, or concrete, use a 1/4" masonry bit to drill holes in your wall, then insert the included wall anchors. (If you’re installing on wood or siding, you can skip this step.) 1213 Screw in the Corner or Wedge Mount. Using the short bracket screws...
Installing Wired Doorbell Pro
...Install the anchors. (optional) On stucco, brick, or concrete, use a 1/4" masonry bit to drill holes in your wall, then insert the included wall anchors. (If you’re installing on wood or siding, you can skip this step.) Screw in the Corner Mount. Using the long mounting screws, secure the Corner...
Installing Battery Doorbell Plus (2nd Gen)
...On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is...
Installing your Video Doorbell Wired
...holes in your wall, then insert the included wall anchors. (If you’re installing on wood or siding, you can skip this step.) 22-002711-08 2345678 Setup Guide Doorbell Wired Included hardware. BagHardware A (2) 1" Mounting Screws (2) Wall Anchors B (2) 3/16" Security Screws C 1x Jumper Cable Find...
Installing PoE+ Converter Mount
...On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. Routing the Ethernet cable through the side: 3a. Align the grommet, spacer, and mounting plate, then route the Ethernet cable through the slot...
Installing Spotlight Cam (1st Gen) for Battery, Solar, and Wired
...Install Screws Use these to secure the mounting bracket to your wall. Wall Anchors Use these to attach the mounting bracket to your wall if installing on a hard surface, such as stucco or brick. . 11121314151617181920 Mark the...
Installing Wired Doorbell Pro (3rd Gen) PoE
...is facing in your desired viewing direction. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over the USB-C cable using the screws included with your wedge kit, ensuring it is facing...
Installing Spotlight Cam Pro (2nd Gen) Plug-In
...into an outlet. 11. Anchor the power cable to the wall or ceiling with the included cable clips. 12. Secure the power adapter with the included anchors and screws. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. Ceiling installation 1...
Installing your Solar Panel (USB-C) (2nd Gen)
...Panel toward the north. Make sure there is nothing blocking sunlight from reaching your Solar Panel. Hardware in the box Mounting screws Mounting anchors Cable clips Tools needed Phillips-head screwdriver Drill (optional) Installing your Solar Panel Screw the bracket to the wall. If mounting to...
Installing Outdoor Cam Pro Plug-In
...and tighten the security screw. 10. Plug the power adapter into an outlet. 11. Anchor the power cable to the wall or ceiling with the included cable clips. 12. Secure the power adapter with the included anchors and screws. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to...