Search Results for Ring Help
Showing results for mount
Using a Wedge or Corner Kit with your doorbell
...or Corner Kit. If your screw bags are not labeled, only use included mounting screws that are 1.25 inches (31 mm) or shorter to secure your Ring doorbell to the Wedge or Corner mount. Mounting a battery doorbell Mounting a wired doorbell...
Indoor Cam (1st Gen) Installation Guide
...on the bracket pointing upwards. Remove the mounting bracket Slide it down. It’ll come right off the base. Drive the screws Hold the plate against your wall, making sure the “UP” arrow is pointing up, and mount it with the included screws. Mount your Cam Gently guide the grooves in the base...
Installing Outdoor Cam
...on a wall or ceiling To install on a ceiling, use the mount for Outdoor Cam. Install the mounting plate On walls: UP arrow points upward. On ceiling and eaves: UP arrow points toward target area. Warning: Only use the included mounting screws when securing the mounting plate, and avoid...
Installing battery-powered doorbells
...Step 3: Positioning your doorbell For the best results, mount the doorbell 4 feet (1.2 meters) above the ground. Learn more about positioning your doorbell. Step 4: Preparing the mounting surface If using a Wedge Kit, Corner Kit , or mounting bracket with your device, install before mounting the...
Alarm Contact Sensor and Window and Door Sensor Positioning Tips
...are made up of two parts, the sensor and the magnet. One part should be mounted on the door or window, the other on the trim. Window and Door Sensor Alarm Contact Sensor (2nd Gen) Alarm Contact Sensor (1st Gen) You can mount the Alarm Contact Sensor and Window and Door Sensor on the door or window...
Device Compatibility List
...2nd Gen) Ceiling Mount Spotlight Cam Wired Mount for Stick Up Cam Stick Up Cam (2nd Gen) Stick Up Cam (3rd Gen) Stick Up Cam Elite Special Mounts No-Drill Mount For Video Doorbell (2nd Gen) For Video Doorbell 3, Video Doorbell 3 Plus, Video Doorbell 4...
Installing Outdoor Cam Plus Battery
...to secure in place. Replace the rubber cap. 11. Adjust your camera’s angle, then tighten the screw on the camera mount arm to secure in place. Ceiling installation 1. Slide the mounting plate in the direction opposite to the UP arrow to remove...
Installing Wired Doorbell Plus
...DO NOT USE any screw other than the included 1" mounting screws when securing your Ring Doorbell. If you need both vertical and horizontal adjustment, you can stack the Corner and Wedge Mounts and mount them both with the medium or long bracket screws. Connect the doorbell...
Installing Outdoor Cam Pro PoE
...junction box cover mount in place. Cover the center screw hole with the included plug. Slide the mounting plate in the direction opposite to the UP arrow to remove. Unscrew to detach the camera mount. Remove the middle rubber cap on the back of your camera. Tighten the included hex joint onto the...
Installing Outdoor Cam Plus Plug-In
...back of your camera with its screw. 8. Plug in the power cable. Be sure the power cable is fully inserted 9. Clasp the camera mount and attach your camera to the mounting plate by sliding until you feel a click. (Optional) If installing with a Quick Release Battery Pack, twist the battery cover to...