Search Results for Ring Help
Showing results for attach
Installing Floodlight Cam Pro (2nd Gen)
...the mounting plate, and attach with the included screw. 3. Align the mounting bracket with the junction box, ensuring FRONT faces outward, and attach using the included screws. Floodlight Cam Pro (2nd Gen) | 8EN 10. Rotate the lights out of the way, then rotate your camera clockwise. 9. Gently...
Installing PoE+ Adapter with Mount
...7. Attach the camera mount to the back of your camera with its screw. / Fixer le support de la caméra à l’arrière de celle-ci avec la vis intégrée au support. / Conecta el montaje de la cámara a la parte trasera de la cámara con su tornillo. 8. Clasp the camera mount and attach your camera...
Installing Access Controller Pro 2
...on the antenna mounting post inside the call box, and screw the nut to fix the antenna in place so it’s tightly mounted. Do not overtighten. 6. Attach the antenna connector to the device’s antenna port until it locks in place...
Installing Hardwired Transformer Kit
...remove the transformer. Mount the new doorbell transformer in place of the old one. Connect the wires. Once the new transformer is mounted, attach your household power wires to the matching wires on the new transformer using wire nuts. Then connect your existing doorbell wires to the two...
Installing your Video Doorbell Wired
...ring.com/app Set up your Ring Doorbell. In the Ring app, select Set Up a Device and follow the in-app instructions. Secure your Ring Doorbell. Re-attach the faceplate, then use the included screwdriver to drive the small security screw into the bottom of your Ring Doorbell...
Installing Indoor Cam Plus
...your camera to the mounting plate by sliding until you feel a click. 6. Connect the power cable to the power adapter and plug it into an outlet. Attaching the lens cover 1. Align the dotted line on your lens cover with the dotted line on top of your camera. 2. Push the cover onto your camera until...
How To Replace the Cable on Your Peephole Cam
...the adhesive The replacement cable will have an adhesive strip that is used to attach it to the tube. Peel the backing off the adhesive strip and attach the cable to the tube in the same location you removed the old cable...
Installing Spotlight Cam (1st Gen) for Battery, Solar, and Wired
...shaped security screw on the mounting plate. Mounting Bracket Attach this to the wall first, then slot Spotlight Cam into the socket. Install Screws Use these to secure the mounting bracket to your wall. Wall Anchors Use these to attach the mounting bracket to your wall if installing on a hard...
Installing Wired Doorbell Pro
...Tighten the terminal screws to secure the wires. If your doorbell wires are too short to reach your new Ring doorbell, you can attach the included wire extenders using the included wire nuts. Connecting to a Plug-In Adapter If you are using a Plug-In Adapter, select No chime or...
Installing Spotlight Cam (1st Gen), Mount
...Spotlight Cam in the orientation you plan to install them. Feed the wires through, then insert Spotlight Cam into the box cover. Using the nut attached to the base of the camera's arm, secure the wiring harness from the box cover...