Search Results for Ring Help
Showing results for anchor
Installing Battery Doorbell Pro (2nd Gen)
...to drill holes for the included wall anchors. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is...
Installing and using Panic Button (1st Gen)
...tape. Press the Panic Button firmly to the mounting location and hold for 20 seconds to make sure the tape is secure. Using the mounting bracket, anchors, and screws: Twist the bottom cover counterclockwise so that the unlock symbol is aligned with the indicator. Pull to separate, then set the...
Installing Stick Up Cam Pro
...using a 0.24 in (6 mm) drill bit. Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors. 1. Screw the mount into the back of the camera. 2...
Installing Outdoor Cam Pro PoE
...on the wall or ceiling with the included screws. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the wall anchors included with your adapter. Plug the other end of the USB-C cable into the adapter until the indicator line disappears. Plug the Ethernet cable...
Installing Solar Panel for Battery Doorbells (2nd Gen)
...cable can reach your doorbell before securing. On stucco, brick, or concrete, use a ¼ in (6 mm) masonry bit to drill holes for the included wall anchors. Solar Panel for Battery Doorbells (2nd Gen) | 6EN 5. Install your doorbell’s mounting bracket. 4. Install the doorbell spacer with the included...
Installing Outdoor Cam Plus Plug-In
...mount arm to secure in place. 13. Plug the power adapter into an outlet. 14. Anchor the power cable to the wall or ceiling with the included cable clips. (Optional) Secure the power adapter with the included anchors and screws. Ceiling installation 1. Slide the mounting plate in the direction...
Installing Solar Charger for battery-powered doorbells
...through the Solar Charger into the wall anchors. Step 3: Mounting the Solar Charger Screw your Ring Solar Charger onto the wall or into the wall anchors. Then, install any Wedge Kits, Corner Kits, or mounting brackets onto the Solar Charger. Step 4: Connecting the doorbell to the Solar Charger For...
Setting up and installing your Ring Smart Lighting Solar Floodlight
...Insert the wall anchors before inserting the screws. Then drill the holes and insert the anchors. Attach the Solar Panel by positioning the slots in the rear of your Solar Panel over the mounting arm and slide it down to secure it. Loosen the...
Installing battery-powered doorbells
...B) Additionally, some devices come with: Wedge Kit or Corner Kit Short bracket screws (C) Medium corner mounting screws (C) Additional mounting anchors (C) Wire nuts (D) Wire extenders (D) Tools needed: Phillips head screwdriver Drill with 1/4 inch (6 mm) drill bit (optional) For hardwired...
Installing PoE+ Adapter with Mount
...box on the wall or ceiling with the included screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the included wall anchors. 3. Cover the screw holes with the included plugs. 4...