Search Results for Ring Help
Showing results for install
Installing Outdoor Cam
...Step 4: Installing on a wall or ceiling To install on a ceiling, use the mount for Outdoor Cam. Install the mounting plate On walls: UP arrow points upward. On ceiling and eaves: UP arrow points toward...
Installing Indoor Cam
...We recommend placing your device on a heat-resistant surface. Step 3: Install Indoor Cam Installing on a table or shelf Indoor Cam comes with the base installed for placement on a flat surface, such as a table or shelf. Installing on a wall or ceiling 1. Remove the mounting plate. Slide the mounting...
Installing Indoor Cam Plus
...2. Use the mounting plate as a guide to mark screw holes on the wall. 3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included...
Installing and using Outdoor Siren
...Caution: When standing on a ladder, please use extra caution when performing these tasks to minimize the risk of falling. Tips for installing your Outdoor Siren Install your Outdoor Siren where it is visible to anyone passing by. Install the Outdoor Siren where you can easily access it. Install the...
Installing Your Mailbox Sensor
...NOTE : The antenna requires a gap or hole in your mailbox to connect to your sensor once it is installed. 6. Insert the antenna cable through the gap or hole in your mailbox. 7. Plug the antenna into your sensor. 8. Mount your sensor on the inside...
Installing Stick Up Cam Elite
...base, if it’s not already attached. Snap the cover onto the top of the base. Place Stick Up Cam on a table or shelf. Stick Up Cam is now installed. Installing Stick Up Cam Elite on a wall: 1...
Installing Wired Doorbell Pro
...The Pro Power Kit ensures that your Ring Doorbell gets the power it needs, and must be installed before you install your Ring Doorbell. Your Ring Doorbell is compatible with doorbell systems supplying 16–24 volts AC at 50 or 60Hz, 40VA max. The AC...
Installing Wired Doorbell Plus
...electrician. 67 Grab the included Pro Power Kit. The Pro Power Kit ensures that your Ring Doorbell gets the power it needs, and must be installed before you install your Ring Doorbell. Your Ring Doorbell is compatible with doorbell systems supplying 16–24 volts AC at 50 or 60Hz, 40VA max. If you...
Installing Stick Up Cam Pro
...you want to monitor. Step 4: Installing the mounting plate Warning: Only use the included mounting screws when securing the mounting plate, and avoid positions that have electrical wiring behind the plate. Do not drill into your home's electrical wiring. If installing on a wood surface, screw the...
Installing Outside Door Sensor
...Leave at least 1/2 in (12.7 mm) of space to open the battery compartment. 2. Install the mounting brackets. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included wall anchors. 3. Slide the...