Ring Alarm Base Station with the Keypad and Stick Up Cam on a console in a modern home

Ring Alarm Base Station Replacement Checklist

To get your Ring Alarm system working just the way you want it, let’s finish these last few steps. To make sure you don’t miss anything, we’ve created this short checklist to help you confirm that your Ring Alarm is set up correctly and is ready to go.

Base Station replacement checklist

Before you begin, make sure your Ring Alarm or Ring Alarm Pro is disarmed.

  • Check all of your security devices.
    Open the Ring app, tap on the menu, then tap Devices, then tap on each device listed and check the settings. If any device is offline, you’ll need to wake it up by following these steps:
  • Contact Sensors
    Contact Sensor (1st gen): Open and close the door or window. If that doesn’t work, tamper the device by opening and closing the cover.
    Contact Sensor (2nd gen): Tap the button on the front of the sensor.
  • Motion Detector
    Motion Detector (1st gen): Walk in front of the Motion Detector, or wave your hand in front of it. If that doesn’t work, tamper the device by opening and closing the cover.
    Motion Detector (2nd gen): Tap the button on the front of the sensor.
  • Keypad
    First, try to unplug and replug the Keypad. If this doesn’t work:
    Keypad (1st gen): Press and hold the number 1 for five seconds
    Keypad (2nd gen): Tap the pinhole reset button using a pinhole tool or paper clip.
  • Range Extender
    Range Extender (1st gen): Unplug and replug the Range Extender to wake it up.
    Range Extender (2nd gen): Tap the button on the front of the sensor.
  • Smoke/CO Listener*
    Tap the setup button on the side of the device. If this doesn’t work, open and close the cover to wake it up.
  • Flood & Freeze Sensor
    Tap the setup button on the side of the device. If this doesn’t work, open and close the cover to wake it up.
  • Panic Button
    Open and close the cover to wake it up. (Do not press the button on the front as it could trigger a false alarm.)
  • Retrofit Alarm Kit
    Open and close any door or window with a working wired sensor. If this doesn’t work, open and close the Retrofit cover to wake it up.
  • Re-enroll in professional monitoring.*
    If you have an eligible Ring subscription and were previously enrolled in professional monitoring,* use the Ring app to :
    1. Open the Ring App.
    2. Tap the Menu.
    3. Tap Settings.
    4. Tap Monitoring.
    5. Tap Professional Monitoring.*
    6. Tap I Agree to agree to the terms and conditions.7. Complete the rest of the professional monitoring* setup, then check your email.
  • Complete the rest of the professional monitoring* setup, then check your email.
  • Set up any Alexa routines.
  • Set up Linked Device settings.
    This will will trigger Ring cameras to record and Ring Smart Lighting to turn on when your Ring Alarm is alarming.
  • Check your other Z-Wave smart home devices.
    If any are still offline, try to use them to wake them up.

*
A compatible Ring subscription is required to enroll in Alarm Professional Monitoring. Service available within the U.S. (all 50 states, but not U.S. territories) and in Canada (excluding Quebec). Ring does not own its monitoring center. Smoke and carbon monoxide monitoring is not available for business or commercially zoned addresses. See Ring Alarm licenses at: ring.com/licenses. Additional fees may be required for permits, false alarms, or Alarm Verified Guard Response, depending on your local jurisdiction.
Last updated 1 month ago
English (US)Change
©2024 Ring LLC or its affiliates
|
||