A homeowner installing and making final adjustments to their Spotlight Cam Pro Wired

Installing your Spotlight Cam Pro, Battery

Download/view the manual (US English, French Canadian and Latin American Spanish).

This article outlines the step-by-step process to install your Spotlight Cam Pro, Battery.

Quick Start

1. Download and open the Ring app.

2. Select Set Up a Device.

3. Scan QR code with the Ring app.

Hardware included

blobid26.png
  • Mounting screws
  • Mounting anchors

Tools needed

blobid27.png
  • Phillips-head screwdriver
  • Drill (optional)

Note: Remove protective film from device. This ensures your device works properly.

Remove the battery.

Twist the battery compartment counterclockwise to unlock

and remove the cover.

blobid28.png

Then, remove the battery and discard the orange

battery insulator.

Charge the battery.

Plug it into a power source using the provided USB cable.

Once the battery’s fully charged, only one light on top will

glow green.

blobid29.png

Re-insert the battery.

Slide the battery back into the camera until it clicks

into place.

blobid30.png

Twist the battery compartment cover clockwise to lock it

and tighten the security screw.

blobid31.png

Choose a location with the view you want.

Your camera can be mounted on an outdoor wall,

eave, or overhang.

If installing on a wall...

Your camera comes ready to mount, with the ball joint

pointing down. No adjustments are needed.

blobid32.png

If installing on an eave or overhang...

Remove the battery compartment cover by twisting it

counterclockwise and insert the ball joint plate with the ball

joint pointing up.

blobid33.png

Remove the mounting plate.

Slide it down to remove it from the camera mount.

blobid35.png

Install the mounting plate.

For wall installation, the UP arrow should point up. For an

eave or overhang, the arrow should point toward the area

you want to monitor for motion.

If installing on a wood surface, screw the plate directly into

the wall.

If installing on a masonry surface, mark four screw holes

using the plate as a guide.

Drill pilot holes using a 1/4” (6mm) drill bit. Insert the

included wall anchors, then drive the four mounting screws

through the mounting plate into the wall anchors.

WARNING! Only use the included mounting screws

when securing the mounting plate.

CAUTION! DO NOT drill into your home’s electrical wiring.

Attach the camera mount.

Slide it onto the mounting plate.

blobid36.png

Then, tighten the security screw.

blobid37.png

Attach your camera to the camera mount.

Loosen the metal collar on the bracket using a Phillips-head

screwdriver (not included). Push the ball joint into the socket

until it snaps into place.

blobid38.png

Adjust the camera angle.

Rotate the camera to focus on the area of your choice. Look

at Live View in the Ring app to make sure it’s positioned at

your desired angle.

Tighten the security screw.

Then, tighten the screw on the metal collar to secure the

camera position.

blobid39.png

Last updated 2 months ago