Installing No-Drill Mount for Ring battery doorbells

You can use a No-Drill Mount for Ring battery doorbells if you are a renter or simply don’t want to drill holes in your walls.

The No-Drill Mount uses double-sided adhesive to attach the plate to your wall so you can securely screw your Ring video doorbell directly onto the mounting plate, no power tools required.

Important note: Make sure you have the correct No-Drill Mount for your doorbell. No-Drill Mounts are model-specific and not interchangeable between different doorbell generations or models.

Hardware included

Illustration of No Drill Mount installation hardware screws A and B.

Tools needed

Illustration of a cross point screwdriver needed for installation.

Installing a doorbell without a mounting bracket

1. Choose a smooth, even mounting surface, and wipe it clean. Do not install on glass.

2. Remove the protective strips from the adhesive tape.

Illustration of how to remove the Protective Strips for the No Drill Mount.

3. Hold the mount against the mounting surface for five minutes and allow an hour for it to adhere.

Illustration of No Drill Mount with arrows indicating holding it flat to the mounting surface.

4. Remove your doorbell’s faceplate.

Illustration of doorbell with dotted lines and arrowhead showing faceplate being moved away from doorbell that is on the wall.

5. Attach your doorbell using the four included mounting screws.

Illustration of how to attach the Ring Video Doorbell to the No Drill Mounting Bracket.

6. Refer to your doorbell setup guide to secure your doorbell.

Installing a doorbell with a mounting bracket

1. Choose a smooth, even mounting surface, and wipe it clean. Do not install on glass.

2. Remove the protective strips from the adhesive tape.

3. Hold the mount against the mounting surface for five minutes and allow an hour for it to adhere.

4. Attach the mounting bracket using the four included mounting screws.

Illustration of how to attach the Mounting Bracket to the No Drill Mount.

5. Attach your doorbell to the mounting bracket.

Illustration of how to attach the Ring Battery Doorbell to the No Drill Mount Mounting Bracket.

6. Refer to your doorbell setup guide to secure your doorbell.

Installing a doorbell without a mounting bracket on a Wedge or Corner Kit

1. Choose a smooth, even mounting surface, and wipe it clean. Do not install on glass.

2. Remove the protective strips from the adhesive tape.

3. Hold the mount against the mounting surface for five minutes and allow an hour for it to adhere.

4. Attach the Wedge or Corner Kit using the two included bracket screws. If installing on a Wedge Kit, insert a screw into a threaded hole on either side of the bottom opening. For best results, only use one Wedge or Corner Kit.

Illustration of how to attach a Ring Wedge Kit to the No Drill Mount Mounting Bracket.

Illustration of how to attach a Ring Corner Kit to the No Drill Mount Mounting Bracket.

5. Remove your doorbell’s faceplate.

6. Attach your doorbell using the four included mounting screws.

Illustration of how to attach the Ring Battery Doorbell to the Ring Corner Kit.

7. Refer to your doorbell setup guide to secure your doorbell.

Installing a doorbell with a mounting bracket on a Wedge or Corner Kit

1. Choose a smooth, even mounting surface, and wipe it clean. Do not install on glass.

2. Remove the protective strips from the adhesive tape.

3. Hold the mount against the mounting surface for five minutes and allow an hour for it to adhere.

4. Attach the Wedge or Corner Kit using the two included bracket screws. If installing on a Wedge Kit, insert screw a into a threaded hole on either side of the bottom opening. For best results, only use one Wedge or Corner Kit.

5. Attach the mounting bracket using the four included mounting screws.