Z-Wave Water Shut-Off Valves (Works With Ring)

Help protect your home from water damage by pairing a Ring Alarm compatible Z-Wave Water Shut-Off Valve (Works With Ring) with your Ring Alarm system.

Z-wave water shut-off valves can be used to shut off your main water supply from the Ring app. When a water leak, freezing temperature or both are detected at your location by your Ring Flood & Freeze Sensor, you can have Auto Close (Ring Protect Basic subscription required) close the valve for you, giving you peace of mind whether you’re at home or you’re away. Learn more about Works With Ring devices to enhance your Ring of Security.

How does Auto Close for water shut-off valves work?

Save precious moments when water or freezing temperatures are detected with the Auto Close feature, located on your water shut-off valve’s device dashboard in the Ring app. Once Auto Close has been set up for your Z-Wave water shut-off valve, Ring will automatically close your water shut-off valve when there is a flood or freeze emergency. To turn on Auto Close for your Z-wave water shut-off valve:

1. Open the Ring app.
2. Tap the

   menu (☰)

   .
3. Tap

   Devices

   .
4. Select the Z-Wave water shut-off valve you would like to update.
5. Tap the

   Auto Close

   tile.
6. From the list of available Flood & Freeze Sensors, select which conditions

   ¹

   will trigger Auto Close:
   1. Tap the

      Water Droplet

      to Auto Close the valve when water is detected.
   2. Tap the

      Snowflake

      to Auto Close the valve when freezing temperatures are detected.
   3. Tap the

      Water Droplet

      and

      Snowflake

      to Auto Close the valve when water and/or freezing temperatures are detected.
7. Tap

   Save

   .

Troubleshooting Works With Ring Water Shut-Off Valves

It is possible that your water shut-off valve may enter into an unknown state, which may interrupt its ability to shut off your water supply. This sometimes happens if the valve is stopped while opening or closing. To return your water shut-off valve to a normal state:

• Check that the device is powered on.
• Press the physical button on the Z-wave water shut-off valve to open or close it.
• If the above options don’t work, remove your water shut-off valve using the Ring app. Then factory reset your device, following the manufacturer instructions, and re-add it to the Ring app.

Zooz Titan Water Valve Actuator

Easy to setup and pair with your Ring Alarm system, the Zooz Titan Water Valve Actuator is the first Z-Wave water valve to be added to the list of Works With Ring devices. Designed to detect water leaks in tandem with the Ring Alarm Flood/Freeze Sensor, it is a key piece of your Ring of Security. The Zooz Titan Water Valve Actuator installs over a quarter-turn ball valve and requires no tools to install. Check to ensure it is compatible with your pipes and valve before installing. Before connecting a Zooz Titan Water Valve Actuator to the Ring Alarm system, follow the manufacturer instructions to install the device on your valve and perform a calibration. If a calibration is not done, you may encounter problems.

Learn more about installing the Zooz Titan Water Valve Actuator.