Search Results
Showing results for stucco
Ring Spotlight Cam Battery Installation
...either up or down, so experiment until you find what you like best. Use the bracket to mark your holes. If installing on a masonry surface like stucco or brick, use the provided drill bit to make your holes, then insert wall anchors before installing the screws. If installing on a wooden surface...
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...the mount over the USB-C cable using the bottom holes in the top and bottom sections, ensuring it is facing in your desired viewing direction. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the...
Installing Outdoor Cam Pro Plug-In
...12. Secure the power adapter with the included anchors and screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the included wall anchors. Ceiling installation 1. Slide the mounting plate in the...
Installing your Pan-Tilt Indoor Cam
...Install the mounting plate with the UP arrow pointing opposite of your desired viewing direction. On stucco, brick, or concrete, use a 5 mm (3/16 inches) masonry bit to drill holes for the included wall anchors. Secure your camera to the mounting plate...
Installing Outdoor Cam Pro PoE
...Install the adapter on the wall or ceiling with the included screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the wall anchors included with your adapter. Plug the other end of the USB-C cable...
Installing PoE+ Adapter with Mount
...ت المحو ّ ثب On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the wall anchors included with your adapter. / Bohren Sie bei der Montage...
Installing Indoor Cam Plus
...2. Use the mounting plate as a guide to mark screw holes on the wall. 3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included wall anchors. 4. Plug the power cable into your camera. Note...
Installing Floodlight Cam Wired Pro (2nd Gen)
...2. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. Floodlight Cam Pro (2nd Gen) | 7EN 3. Feed the wires...
Installing your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...2. Install the anchors (optional) On stucco, brick, or concrete, use a 0.6cm masonry bit to drill holes in your wall, then insert the included wall anchors. (If you’re installing on wood or...
Installing Outdoor Cam Plus Plug-In
...niin, että UP-nuoli osoittaa ylöspäin. / Montér monteringspladen med OP-pilen opad. / إلى الأعلىUPب لوحة التثبيت مع اتباع اتجاه السالسهم ّ رك On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. / Bohren Sie bei der Montage auf Putz...