Search Results
Showing results for armed
Arming and disarming your Ring Alarm
...Alarm devices. Customising your Exit Delay When Home or Away mode is set, an Exit Delay gives you time to leave your home before the Alarm is armed. During Exit Delay, you cannot turn on the siren. However, if the siren is already sounding, it overrides the Exit Delay. You can set an Exit...
Setting up and using your Ring Alarm Motion Detector
...your Motion Detector settings to help you avoid false alarms. This is important, especially if you have pets. Armed modes: By default your Ring Alarm Motion Detectors are only armed when using Away Mode. Learn more about modes here. Installation: Motion Detectors should be installed on a wall...
Bypass a Contact Sensor with Ring Alarm Quick Exit
...the Sensor resets to Armed Mode, at which point the green light will stop blinking. Your system will reset to being fully armed as soon as you close the door again. If you have left and need to go back inside your home, keep in mind that the door’s Contact Sensor is now armed...
Ring Alarm Keypad (1st Generation) lights and buttons explained
...one segment at a time will quickly light up clockwise until the LED ring is fully lit. Armed - Away and Stay Mode (one or more sensors monitored) * Illuminates when the alarm system state changes to armed (Away or Home) * Will not illuminate when Power Saving is On Red, with a pattern...
Arming and disarming your Ring Alarm, Video Doorbell and Security Camera with Alexa
...is set up, try the following commands. Once your Ring account is linked to Alexa, arm the Alarm by saying: “ Alexa, arm Ring. ” Once armed, Alexa will respond with: “ Ring is armed in home/away mode. ” To check the status of your Alarm, say: “ Alexa, is Ring armed? ” To disarm your Ring Alarm, say...
Updating the firmware on your Ring Alarm devices
...device is disarmed 1 to make sure your home remains secure. A single device undergoing a firmware update cannot be armed and monitored until the update completes. If you need to arm 1 your Ring Alarm, you need to bypass any device that is mid-update . Scheduled firmware updates Scheduled updates...
Ring Alarm (1st Generation) Installation Guide
...of Sensors. By default, Away Mode arms all Sensors and Home Mode arms only Contact Sensors used on doors and windows. You can customise which Sensors are armed in Home and Away Mode. For example, if you want to avoid arming a specific door while in Home Mode, you can adjust this using Mode...
Preventing false alarms
...to arrive and leave home. Secure doors and windows: Close doors and windows tightly to make sure they are shut. If your door or window opens while armed, it could set off a false alarm. Secure Contact Sensors: Securely attach Contact Sensors and magnets to your doors and windows. If your device...
Ring Alarm Glass Break Sensor - Configurable settings
...or Away Mode and the sensor’s Mode Settings are configured to “armed and monitored”. If the system is Disarmed, or the sensor is “ignored when armed” in Home or Away Mode, the Glass Break Sensor will not detect breaking glass. When Power Save Mode is OFF , the sensor will detect for breaking...
Using device modes for Ring Alarm, Video Doorbells and Security Cameras
...sensor you want to adjust. Tap Mode Settings . Select a Mode you want to adjust. Set actions for each sensor. In Disarmed Mode: No sensors are armed. Choose if you want to hear Chirp sounds. In Home or Away Mode: Choose which sensors you want armed, and if you want Chirps, an Entry Delay, and...