Search Results
Showing results for i-anchor
Installing Intercom Kit for Video Doorbells
...4. Align intercom kit and intercom gasket. 5. Mount with included screws. On stucco, brick, or concrete, use a holes for the included wall anchors. 6. Attach video doorbell gasket around wire terminal, if necessary. Battery Video Doorbell, Video Doorbell Battery Video Doorbell Plus/Pro 7...
Installing Wedge Kit for Wired Video Doorbell Plus (2nd Gen)
...with the included screws, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. 4. If installing multiple wedge or corner mounts, insert the included screws through both mounts to hold them together. NOTE: We do not...
Battery Video Doorbell Plus (2nd Gen)
...Battery Video Doorbell Plus (2nd Gen) • Mounting Plate • Push Pin • Corner Kit • Silver Faceplate • Quick Release Battery Pack • Screws and wall anchors • Fork connector wire extenders and wire nuts • Security sticker • USB-C charging cable Compatible Accessories • Quick Release Ultra Battery...
ProductInstalling your Indoor Cam (2nd Gen)
...remove the mounting plate. Install the mounting plate. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. Slide onto mounting plate. Adjust the camera angle. Using the privacy cover. Removing the privacy cover. Attaching the privacy cover...
Getting Spare Parts Kits
...Find a Spare Parts Kit for your doorbell or camera on ring.com. Purchase Spare Parts Kits when you need: Screws or wall anchors Screwdriver Charging cable Mounting bracket Pro Power Kit Drill bit Fork connector extenders Wire nuts Key tool, flex cable, spacer, or...
Set up and install Ring Intercom Audio or Ring Intercom Video
...the screws. For brick, concrete, or stucco walls: Mark where you'll need to drill holes, and use a power drill with a 6mm drill bit. Insert wall anchors if needed. Line up your device with the holes and use the screwdriver we gave you to put in the screws...
Installing Wired Video Doorbell Elite (2nd Gen)
...the surface mount with the included screws. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 5. Attach your doorbell’s mounting bracket to the surface mount with the included screws. 6. Use the removal tool to remove your doorbell’s...
Installing Pole and Wall Mount for Cameras and Solar Panels
...On stucco, brick, or concrete, use a 7/32 in (5.5 mm) masonry bit to drill holes for the included wall anchors. Mount your solar panel. NOTE: If installing without a solar panel, insert the solar mount arm cover until you hear a click. 1. Slide the solar...
Ring Alarm (2nd Generation) Installation Guide
...Place the mounting bracket on the wall, then use the wall anchors and screws from your kit to fasten the bracket to the wall. (If using anchors, you should pre-drill holes.) Slide the Keypad onto the bracket. To place the Keypad on a table: Slide the bracket off of the Keypad. Flip the...
Installing Floodlight Cam Wired Plus and Pro
...plate from the light fixture. Push gently on the threaded posts visible on the front of the fixture and pull the bracket free. 6. Install the anchors If you’re installing on wood, skip this step. If installing on stucco, brick or concrete, mark 2 drill holes using the plastic mounting plate as...