Search Results
Showing results for i-anchor
Installing Wired Video Doorbell Plus (2nd Gen) Hardwired
...On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is...
Installing and using Ring Alarm Contact Sensor
...peel the backing from the mounting tape and press the Sensor and magnet into place. 6. To install using screws you will need: Screws: 4x 3x21mm. Anchors: 4x 5mm. If you’re using the Contact Sensor on a door you use often, choose Main Door as the placement option...
Outdoor Cam
...Release Battery Pack • Micro USB charging cable • Wall and table mount/bracket (ceiling mount sold separately as accessory) • Screws and wall anchors • Quick Start Guide • Security sticker Compatible Accessories • Quick Release Battery Pack • Solar Panel (Barrel Plug) • Solar Panel USB-C...
ProductInstalling your Hardwired Kit for Spotlight Cam Wired/Mount
...to secure it. Note: If installing on a hard surface like brick or stucco, pre-drill these holes with the included bit and push the included anchors into the holes. Next, secure the earth wire from your home (bare copper or green/yellow jacketed) under the earthing screw...
Hardwiring your battery-powered Ring doorbell
...needed. Installing on a masonry surface Using the marked screw hole locations, drill pilot holes using a 6 mm drill bit. Insert the included wall anchors...
Wired Video Doorbell (2nd Gen)
...detection 3 • Pre-Roll • Works With Alexa Box Includes • Wired Video Doorbell (2nd Gen) • Mounting Plate • Installation Hardware (Screws & Anchors) • Bypass Cable • Security Sticker Compatible Accessories • DIN Rail Transformer (2nd Gen) • Plug-In Adapter (2nd Gen) • Wedge Kit • Corner Kit...
ProductInstalling Wedge Kit for Wired Video Doorbell Pro (3rd Gen)
...On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. 4. If installing multiple wedge or corner mounts, insert the included screws through both mounts to hold them together. NOTE: We do not...
Installing Solar Charger for Battery Doorbells (2026)
...On stucco, brick, or concrete, use a 6 mm (¼ in) masonry bit to drill holes for the included wall anchors. 4. (Optional) If installing a wedge mount, mount it directly onto your solar charger with the included screws. 5. (Optional) If installing a...
Installing Outdoor Cam
...using a 0.24 in (6 mm) drill bit. Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors. Connect camera to the mounting plate 1. Unscrew the base using a Phillips head screwdriver. 2. Secure the base to the camera's back, with the UP...
Installing Floodlight Cam (2nd Gen)
...On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. 2. Feed the wires through the mounting plate. 3. Install the mounting plate with the UP arrow pointing up. NOTE: Use the included screwdriver...