Search Results
Showing results for drill
Installing a Solar Panel with your security camera
...Panel Hardware included: Mounting screws Mounting anchors Some models come with cable clips and anchors Tools needed: Phillips head screwdriver Drill with 6mm (1/4") bit Step 1: Mounting the Solar Panel Mount your Solar Panel to a wall or flat surface. To properly line up your Solar Panel, use...
Installing Battery Video Doorbell Plus (2nd Generation)
...On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with...
Installing Wired Video Doorbell Plus (2nd Gen) Plug-In
...corner mounts can be stacked together. We do not recommend more than two. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors...
Ring Alarm (2nd Generation) Installation Guide
...mounting bracket at the mounting location and level it using the spirit level. Mark your holes using the mounting bracket as a guide. Drill holes using a 6mm drill bit. Adjust the tamper arm screw to ensure that the arm makes contact with the mounting surface...
Installing Outdoor Cam Plus Battery
...plate with the UP arrow pointing opposite of your desired viewing direction. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 4. Unclasp the camera mount. 5. Unscrew to detach the camera mount from the battery cover. 6. Remove the...
Installing your Pan-Tilt Indoor Cam
...with the UP arrow pointing opposite of your desired viewing direction. On stucco, brick, or concrete, use a 5 mm (3/16 inches) masonry bit to drill holes for the included wall anchors. Secure your camera to the mounting plate by sliding until you feel a click. Plug in the power cable. Anchor...
Using a Wedge Kit or Corner Kit with your doorbell
...Step 4: Preparing the mounting surface Installing on a wood surface Drills and wall anchors are not needed. Installing on a masonry surface Using the marked screw hole locations, drill pilot holes using a 1/4” or 6mm drill bit. Insert the included wall anchors. Step 5: Securing the Wedge or...
Ring Spotlight Cam Battery Installation
...arm as a template Install wall anchors (optional): If installing on a hard surface (such as stucco or brick), use the included drill bit to pre-drill the mounting holes, then insert the wall anchors. If installing on wood or siding, skip this step...
Installing Spotlight Cam (2nd Generation)
...included cable clips. 5. Secure the power adapter with the included anchors and screws. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors...
Installing Wired Video Doorbell Pro (3rd Gen) Plug-In
...corner mounts can be stacked together. We do not recommend more than two. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors...