Search Results
Showing results for i-anchor
Ring device manuals
...then use the wall anchors and screws from your kit to fasten the bracket to the wall (If using anchors, you should pre-drill holes). 2. Slide the Keypad onto the bracket. Screws: 3x 3x21mm. Anchors: 3x 5mm. If you’re planning to use the Keypad unplugged, you should fully charge it first. SAFETY...
Stick Up Cam (1st Gen)
...with adjustable angles • Works with Alexa Box Includes • Stick Up Cam (1st Gen) • Quick-release mount • USB cable (6 m) • Installation screws and anchors • Quick Start Guide Software Security System Requirements...
ProductInstalling Outdoor Cam Plus Battery
...opposite of your desired viewing direction. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 4. Unclasp the camera mount. 5. Unscrew to detach the camera mount from the battery cover. 6. Remove the rubber cap on the back of your camera...
Using a Wedge Kit or Corner Kit with your doorbell
...Installing on a masonry surface Using the marked screw hole locations, drill pilot holes using a 1/4” or 6mm drill bit. Insert the included wall anchors. Step 5: Securing the Wedge or Corner mount onto the wall Warning: Use only the included mounting screws when securing the Wedge or Corner Kit to...
Ring Alarm Outdoor Contact Sensor Quick Start Guide
...into place and screw in the brackets. If mounting on a softer surface like wood, simply screw in the brackets. • 4 screws included: 3x21mm • 4 anchors included: 5x25mm • Metal cable ties (not included) Feed the metal cable ties through the back of the sensor and magnet brackets. Make sure that...
Installing and using Ring Alarm Outdoor Contact Sensor
...into place and screw in the brackets. If mounting on a softer surface like wood, simply screw in the brackets. • 4 screws included: 3x21mm • 4 anchors included: 5x25mm • Metal cable ties (not included) Feed the metal cable ties through the back of the sensor and magnet brackets. Make sure that...
Installing a Solar Panel with your security camera
...Installing the Solar Panel Hardware included: Mounting screws Mounting anchors Some models come with cable clips and anchors Tools needed: Phillips head screwdriver Drill with 6mm (1/4") bit Step 1: Mounting the Solar Panel Mount your Solar Panel to a wall or flat...
Keypad (2nd Gen)
...air, line of sight) Box Includes • Keypad (2nd Generation) • Charging Cable and Power Adapter • Reversible Mounting Bracket • Mounting Screws and Anchors • Reset Tool • Quick Start/Installation Insert • Safety and Compliance Information Installation Wall mount with quick-release bracket or place it...
ProductInstalling and using Ring Alarm Keypad
...then use the wall anchors and screws from your kit to fasten the bracket to the wall (If using anchors, you should pre-drill holes). 2. Slide the Keypad onto the bracket. Screws: 3x 3x21mm. Anchors: 3x 5mm. If you’re planning to use the Keypad unplugged, you should fully charge it first. SAFETY...
Solar Panel (Barrel Connector) for Spotlight Cam and Outdoor Cam (formerly Stick Up Cam, 3rd Gen) Battery
...the following: Mark the holes where you wish to mount your the Solar Panel. Drill a hole for the anchors using the provided drill bit. Insert the anchors. Use the screws to secure the mount. How do I aim the Solar Panel? The adjustable mounting arm allows you to aim the Solar Panel in the best...