Search Results
Showing results for rotate
Installing Spotlight Cam Plus or Pro
...the camera angle You can rotate the camera to adjust the field of view. Remove the protective film from the device to allow motion detection and proper view. Use the Live View feature in the Ring app to make sure the camera is monitoring the desired area. Rotate the camera to adjust the view...
Installing your Contact Sensor (2nd Generation)
...see the LED blink and hear the chime when you open the door or window. You can rotate the magnet or sensor for a more secure fit. You can also rotate the Contact Sensor or the magnet so they meet at a right angle...
Ring Gutter Mount Installation Guide
...Up Cam. 3. For Spotlight Cam For Stick Up Cam 4. Half-round gutter shown. More gutter types can be found at the end of this user guide. 5. 6. Rotate the knob to secure the support against the front of the gutter...
Ring device manuals
...of the base against your ceiling, rubber-side down. Then mount it with the included screws. Rotate the stand above the camera: The whole stand can rotate on its axis. Before ceiling- mounting, rotate the stand 180 degrees so the base is positioned above your Stick Up Cam. Remove the plastic...
Installing Floodlight Cam (2nd Gen)
...side of the mounting plate. 9. Slide the camera fixture onto the mounting plate and attach using the included hex nuts. 10. Rotate the lights out of the way, then rotate your camera clockwise. 11. Remove the shank from the included screwdriver and use the handle to tighten the hex nuts. Then...
Safety and compliance information for Gutter Mount
...kourutyyppejä näkyy käyttöoppaan lopussa. / Halvrund tagrende vises. Der findes flere typer tagrender i slutningen af denne brugervejledning. Rotate the knob to secure the support against the front of the gutter...
Positioning Alarm Contact Sensors on different types of doors, windows and trim
...surface. Curved or decorative moulding Mount the Contact Sensor or magnet on an angle. Recessed door with a jamb that extends past the door face Rotate the Contact Sensor or the magnet so they meet at a right angle. For proper fit in this position, your Contact Sensor might need to be mounted...
Uninstalling your Door View Cam
...if you're not sure what will be compatible. Once that's done, place the flat edge of the Door View Key into the slots on your peephole and rotate clockwise to screw it in. If you don’t have the Door View Key, you can use a large flathead screwdriver or another flat tool...
Installing Stake Mount for Solar Panels and Cameras
...3. Plug in the power cable. Adjusting your mount Loosen the knob to adjust camera angle, then tighten to secure. Rotate the camera mount pole 360 degrees. Loosen ring to tilt or rotate solar panel mount, then tighten to secure...
Ring Alarm Keypad (1st Generation) lights and buttons explained
...Before the Keypad has been added to the Base Station Blue, rotating Ready to pair via Z-Wave Blue, slowly flashing Z-Wave pairing in progress Blue, solid for five seconds Z-Wave pairing successful Blue, with four...