Search Results
Showing results for anchors
Installing Indoor Cam Plus
...plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included wall anchors. 4. Plug the power cable into your camera. Note : For best results, use the base clip on your camera to secure your cable. 5. Swivel your camera...
Installing Floodlight Cam Wired Pro (2nd Gen)
...2. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. Floodlight Cam Pro (2nd Gen) | 7EN 3. Feed the wires through the mounting plate. 4. Install the mounting plate with the UP arrow pointing toward...
Installing Ring Video Doorbell Wired
...from Bag A (optional) On stucco, brick or concrete, use a 1/4" (6mm) masonry bit to drill holes in your wall, then insert the included wall anchors. Note : If you're installing on wood or siding, you can skip this step. 11. Connect the doorbell wires Loop one doorbell wire around each of the...
Using a Wedge Kit or Corner Kit with your doorbell
...Installing on a masonry surface Using the marked screw hole locations, drill pilot holes using a 1/4” or 6mm drill bit. Insert the included wall anchors...
Installing PoE+ Adapter with Mount
...box on the wall or ceiling with the included screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the included wall anchors. 3. Cover the screw holes with the included plugs. 4...
Installing and using Ring Alarm Outdoor Contact Sensor
...into place and screw in the brackets. If mounting on a softer surface like wood, simply screw in the brackets. • 4 screws included: 3x21mm • 4 anchors included: 5x25mm • Metal cable ties (not included) Feed the metal cable ties through the back of the sensor and magnet brackets. Make sure that...
Installing Wired Video Doorbell Pro (3rd Gen) Plug-In
...together. We do not recommend more than two. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is...
Installing Wired Video Doorbell Plus (2nd Gen) Plug-In
...together. We do not recommend more than two. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is...
Installing Wired Video Doorbell (2nd Gen)
...bracket with the included screws.NOTE: On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 7. Mount your doorbell by hooking it over the bracket and pushing down. 6. Connect the power cable to your doorbell’s wire terminals, ensuring...
Installing Outdoor Cam Plus Battery
...opposite of your desired viewing direction. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 4. Unclasp the camera mount. 5. Unscrew to detach the camera mount from the battery cover. 6. Remove the rubber cap on the back of your camera...