Search Results
Showing results for i-anchor
Installing your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...here (set anchor) To install the Corner Mount: 1. Mark two mounting holes on your wall through the slots on your Corner Mount (fig 1) If you are replacing a Ring doorbell, align the two small screw holes with two of the existing holes in your wall (fig 2). 2. Install the anchors (optional) On...
Installing your Pan-Tilt Indoor Cam
...or concrete, use a 5 mm (3/16 inches) masonry bit to drill holes for the included wall anchors. Secure your camera to the mounting plate by sliding until you feel a click. Plug in the power cable. Anchor the power cable to the wall or ceiling with the included cable clip. Using the privacy...
Installing Battery Doorbell Pro (2nd Gen)
...to drill holes for the included wall anchors. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is...
Installing Spotlight Cam Pro (2nd Gen) Plug-In
...into an outlet. 11. Anchor the power cable to the wall or ceiling with the included cable clips. 12. Secure the power adapter with the included anchors and screws. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. Ceiling installation 1...
Ring Spotlight Cam Battery Installation
...If installing on a hard surface (such as stucco or brick), use the included drill bit to pre-drill the mounting holes, then insert the wall anchors. If installing on wood or siding, skip this step. Screw in the mounting arm: Drive the included mounting screws into your wall (or the wall...
Installing Floodlight Cam Wired Pro (2nd Gen)
...2. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. Floodlight Cam Pro (2nd Gen) | 7EN 3. Feed the wires through the mounting plate. 4. Install the mounting plate with the UP arrow pointing toward...
Installing Spotlight Cam Plus or Pro
...holes using a 6 mm drill bit. Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors. Step 7: Attach the camera mount to the mounting plate Slide the camera mount down onto the mounting plate, then tighten the security screw...
Installing Outdoor Cam Pro PoE
...the adapter on the wall or ceiling with the included screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the wall anchors included with your adapter. Plug the other end of the USB-C cable into the adapter until the indicator line disappears. Plug the Ethernet cable...
Installing PoE+ Adapter with Mount
...box on the wall or ceiling with the included screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the included wall anchors. 3. Cover the screw holes with the included plugs. 4...
Installing Wired Video Doorbell Plus (2nd Gen) Plug-In
...together. We do not recommend more than two. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is...