Search Results
Showing results for screw-fournies
Installing Ring Alarm at your business
...your business. If installing Contact Sensors on warehouse doors or metal door and window casings, you may need to pre-drill holes and get special screws designed for this type of installation...
Installing Wired Video Doorbell Plus (2nd Gen)
...masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is facing down. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the...
Installing Floodlight Cam Wired Pro (2nd Gen)
...Install the mounting plate with the UP arrow pointing toward your desired viewing direction. NOTE: Use the included screwdriver, washers, and screws. 5. Connect the wires to the terminal block with a screwdriver. NOTE: Gently tug on the wires to ensure they are securely connected. 6. Attach the...
Installing Video Doorbell Pro Retrofit Kit
...sit flush against the wall, you can use a pair of pliers to remove one or more of the pins that are preventing it from lying flat. Use the longer screws included in the packaging to secure the Ring Video Doorbell Pro onto the Retrofit Kit through the mounting holes...
Installing Wired Video Doorbell Pro (3rd Gen) Plug-In
...Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is facing down. NOTE: Multiple wedge mounts can be stacked together. We do not recommend more than two...
Installing Wired Video Doorbell Plus (2nd Gen) Plug-In
...Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is facing down. NOTE: Multiple wedge mounts can be stacked together. We do not recommend more than two...
Installing and using Ring Alarm Contact Sensor
...sure there is no more than 1.25 cm between the sensor and magnet when the door or window is closed. If you need to screw the Contact Sensor to the surface, use the included screws to attach the removable backplates to the mounting surface. Then, attach the Contact Sensor parts to the backplates...
Ring Alarm Z-Wave technical information
...and is always awake as long as it connected to line power or running on battery. Installation On the Power Outlet (Secured with Screw) 1. Unscrew the wall plate screw adjacent to the outlet the Range Extender will be plugged into. 2. Plug in the Range Extender, making sure the Screw Flange is...
Installing a Solar Panel with your security camera
...then tighten the adjustment nut or screw when properly positioned. Step 4: Removing the rubber plug from your Ring device For some security camera models, you might need to remove the weatherproofing plug from the rear of your Ring device. Remove any screws holding them on first...
Installing and using Ring Alarm Glass Break Sensor
...is securely attached. • Ceiling. Use the included screws and anchors. First remove the back cover and set the sensor aside. Screw the back cover to the ceiling. To mount the sensor, twist it onto the back cover, and secure it in place. Screws: 2x 3x21 mm. Anchors: 2x 5x25 mm. • Shelf...