An image of the Spotlight Cam 4K Plus, mounted on an exterior wall of a house with the lights turned on.

Installing Ring Spotlight Camera 4K Plus Battery

Safety and compliance information for Ring Spotlight Camera 4K Plus Battery

Download the user manual for Ring Spotlight Camera 4K Plus Battery (English, Dansk, Svenska, Norsk, Suomi, عربي)

Hardware included

An illustration of the included screws and wall anchors.


Tools needed

An illustration of a phillips-head screwdriver.

Phillips screwdriver

An illustration of a drill with a 1/4 in (6 mm) masonry bit.

Drill with 6 mm masonry bit (optional)


1.

Twist the battery cover anticlockwise to open the battery cover.

An illustration of the battery cover being twisted anti-clockwise and removed.

2.

Pull or click the ejector button to remove the battery.

NOTE: A Quick Release Ultra Battery Pack is included with your camera, but if you are using a Quick Release Battery Pack, push the battery tab to remove.

An illustration of the battery being removed from the bottom of the device.

3.

Discard the battery insulator and fully charge the battery.

An illustration of the battery insulator being removed and the battery being charged with a charging cable.

4.

Insert the battery and twist to close the battery cover to the locked position.

An illustration of the camera’s battery cover being pushed up into place, with arrows showing the direction.

5.

Tighten the security screw on the battery cover.

NOTE: The security screw creates a seal to prevent damage from rain or humidity. Always tighten it when replacing the battery.

An illustration of the security screw on the camera’s battery cover being tightened with a screwdriver.

6.

Download the Ring Always Home app.

An illustration of a smartphone with the Ring logo and a download symbol on the screen.

7.

Scan the QR code on your device.

An illustration of a smartphone with a QR code on the screen.

8.

Choose a location.

An illustration of a Spotlight Cam 4K Plus, mounted on a wall or on a ceiling.


Wall installation

1.

Slide the mounting plate in the direction opposite to the UP arrow to remove it.

An illustration of the camera's mounting plate being removed by sliding it in the opposite direction of the UP arrow.

2.

Use the mounting plate as a guide to mark screw holes on the wall with 14 cm of space in every direction.

An illustration of a pencil marking screw holes using the mounting plate as a guide.

3.

Install the mounting plate with the UP arrow pointing up.

An illustration of the mounting plate being installed with the provided screws.

On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors.

An illustration of the included screws and anchors to secure a mounting plate on stucco, brick, or concrete.

4.

Remove the middle rubber cap on the back of your camera.

An illustration of the weatherproof rubber cap on the center back of the Spotlight Cam 4K Plus being removed.

5.

Attach the camera mount to the back of your camera with its screw.

An illustration of the camera mount being installed on the center back of the camera, and the screw secured with a screwdriver.

6.

Secure your camera to the mounting plate by sliding until you feel a click.

An illustration of the camera mount sliding down onto the wall mounting plate, with an arrow showing the direction.

7.

Rotate your camera and tighten the security screw.

An illustration of the wall-mounted camera being rotated and the mount’s security screw being tightened with a screwdriver.

8.

Adjust your camera’s position and tighten the ball joint to secure it in place.

An illustration of the wall-mounted camera’s ball joint being tightened with a screwdriver.


Ceiling installation

1.

Slide the mounting plate in the direction opposite to the UP arrow to remove it.

An illustration of the camera's mounting plate being removed by sliding it in the opposite direction of the UP arrow.

2.

Use the mounting plate as a guide to mark screw holes on the ceiling with 14 cm of space in every direction.

NOTE: For best results, avoid locations with nearby objects that can interfere with your camera’s field of view.

An illustration of a pencil marking screw holes using the mounting plate as a guide.

On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors.

An illustration of the included screws and anchors to secure a mounting plate on stucco, brick, or concrete.

3.

Install the mounting plate with the UP arrow pointing toward your desired viewing direction.

An illustration of the mounting plate being installed on a ceiling using the included screws and anchors.

4.

Remove the top rubber cap on the back of your camera.

An illustration of the weatherproof rubber cap on the upper back of the Spotlight Cam 4K Plus being removed.

5.

Attach the camera mount to the back of your camera with its screw.

An illustration of the camera mount being installed on the upper back of the camera, and the screw secured with a screwdriver.

6.

Secure your camera to the mounting plate by sliding until you feel a click.

NOTE: Your camera should be in an upright position.

An illustration of the camera and camera mount sliding back onto the mounting plate while mounted on a ceiling.

7.

Rotate your camera and tighten the security screw.

An illustration of the security screw on the camera mount being tightened with a screwdriver while mounted on a ceiling.

8.

Adjust your camera’s position and tighten the ball joint to secure it in place.

An illustration of the screw on the ball joint of the camera mount being tightened with a screwdriver while mounted on a ceiling.

Last updated 3 days ago