Pan-Tilt Indoor Cam 2K on a table top in a modern home with a person pressing the top button.

Installing Pan-Tilt Indoor Cam 2K

Safety and compliance information for Pan-Tilt Indoor Cam 2K

Download the user manual for Pan-Tilt Indoor Cam 2KDownload the user manual for Pan-Tilt Indoor Cam 2K ( عربي)Download the user manual for Pan-Tilt Indoor Cam 2K (Dansk)Download the user manual for Pan-Tilt Indoor Cam 2K (Svenska)Download the user manual for Pan-Tilt Indoor Cam 2K (Norsk)Download the user manual for Pan-Tilt Indoor Cam 2K (Suomi)

Hardware included

Hardware included: mounting screw, wall anchor, and mounting bracket with screw hole.

Tools needed

Illustration of a cross point screwdriver needed for installation.

Phillips-head screwdriver

Illustration of a power drill to use as an installation tool.

Drill with 1/4 in (6 mm) masonry bit (optional)

1. Download the Ring Always Home app.

Illustration of a mobile device showing a download symbol and the Ring logo.

2. Scan the QR code on your device.

Illustration to show a phone scanning a QR code on the device.

3. Choose a location.

Three mounting positions for the Pan-Tilt Indoor Cam 2K: flat surface, wall, and ceiling.

On a table or shelf

1. Place your camera on a level surface with 6.5 in (16.5 cm) of space in every direction and plug in.

Pan-Tilt Indoor Cam 2K mounted upright on a flat surface using the swivel base and mounting bracket, camera lens facing forward.

2. Plug the power supply into an outlet and wait for your camera to turn on.

Power adapter plugged into a wall outlet with lightning bolt icon indicating power connection.

On a wall

1. Hold the mounting plate against the surface, and mark screw holes.

Illustration showing a pencil marking screw hole positions on the mounting bracket for the Pan-Tilt Indoor Cam 2K wall installation.

2. Install the mounting plate with the UP arrow pointing up.

Phillips head screwdriver securing the circular mounting bracket to a surface using the provided screw. Inset shows the screw and anchor hardware required.

On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included wall anchors.

Installation guide showing two mounting paths: top row shows a drill, wall anchor, and screw for drywall; bottom row shows a screw only for wood or solid surfaces.

3. Run the power cable through the hole in the mounting bracket without connecting it to your camera.

4. Secure your camera to the mounting bracket by sliding until you feel a click.

Pan-Tilt Indoor Cam 2K being rotated and locked onto the wall-mounted bracket, with the power cable routed along the wall edge toward a power source.

5. Secure your camera and bracket to the mounting plate by sliding until you feel a click.

NOTE: When securing your camera and bracket, ensure your camera is upside down for maximum visibility.

Pan-Tilt Indoor Cam 2K being guided downward onto the wall mounting bracket, with a directional arrow and dotted lines indicating the alignment point on the wall.

6. Connect the power cable into the port on the back of your camera.

Side view of Pan-Tilt Indoor Cam 2K on wall bracket, showing power cable being inserted into the rear port with cable routed along the wall.

7. Anchor the power cable with the included cable clip.

Mounting hardware including screw and wall anchor to attach the Pan-Tilt Indoor Cam 2K bracket to a vertical rail, with reference icons indicating correct hardware

8. Plug the power supply into an outlet and wait for your camera to turn on.

Power adapter plugged into a wall outlet with lightning bolt icon indicating power connection.

On a ceiling

1. Hold the mounting plate against the surface, and mark screw holes with 6.5 in (16.5 cm) of space in every direction.

Illustration showing a pencil marking screw hole positions on the mounting bracket for the Pan-Tilt Indoor Cam 2K wall installation.

2. Install the mounting plate with the UP arrow pointing opposite to your desired viewing direction.

Ceiling mount installation showing a Phillips screwdriver securing the circular Pan-Tilt Indoor Cam 2K bracket to the ceiling, with inset showing required screw and wall anchor.

On stucco, brick, or concrete, use a 3/16 in (5 mm) masonry bit to drill holes for the included wall anchors.

Installation guide showing two mounting paths: top row shows a drill, wall anchor, and screw for drywall; bottom row shows a screw only for wood or solid surfaces.

3. Slot your camera onto its mounting plate.

Pan-Tilt Indoor Cam 2K being rotated upward into the ceiling bracket, with dotted alignment lines and a curved arrow indicating the locking rotation.

4. Connect the included cable to the port on the back of your camera.

Power cable being inserted horizontally into the ceiling-mounted Pan-Tilt Indoor Cam 2K, with arrow indicating the direction of connection.

5. Plug the power supply into an outlet and wait for your camera to turn on.

Power adapter plugged into a wall outlet with lightning bolt icon indicating power connection.

6. Anchor the power cable to the wall or ceiling with the included cable clip.

Bracket clip attached to a vertical pole at an angled junction, with inset showing required Phillips screw and wall anchor for the Pan-Tilt Indoor Cam 2K mount.

Using the privacy shutter

1. To open the privacy shutter, slide the switch on top of your camera to the left.

Pan-Tilt Indoor Cam 2K with zoomed inset of the camera base underside, highlighting the setup button and QR code label, with arrow indicating the button press action.

2. To close the privacy shutter, slide the switch on top of your camera to the right until you see a red circle over the lens.

Pan-Tilt Indoor Cam 2K and zoomed inset of camera base underside showing the release toggle being slid to unlock the camera from its mounting bracket.

Last updated 0 days ago
English (GB)Change
©2026 Ring LLC or its affiliates
|
||