Arming and disarming your Ring Alarm with the Keypad
On the Alarm Keypad, you can physically set your Alarm modes to Disarmed, Home and Away modes.
Learn more about using modes in the Ring app.
Security modes
These three modes on your Ring Alarm will protect your home in different ways. You can switch between them using your Keypad depending on your needs.
Disarmed
In this mode, no sensors in your home will be monitored and no alerts will be sent to the monitoring station. Your Alarm system will still be powered on and functioning.
Home
In this mode, only your perimeter sensors (doors and windows) will be monitored.1 Use this when you'd like to move freely inside your home.
Away
In this mode, all your sensors are monitored1 and an alert is issued if any of them are triggered. Use Away Mode to secure your home when you're leaving it and will be out.
Arming your system
To arm your system using the Alarm Keypad
- Enter your user code.
- Press theHomeModebutton orAwayModebutton.
When you've changed your mode, your Alarm system begins a countdown. This is an Exit Delay, and it gives you time to leave your home before the system arms itself.
You can set an Exit Delay of 0 to 180 seconds:
- Tap themenu(☰) on the upper left.
- TapSettings.
- TapModes and Automations.
- TapModes.
- TapHomeorAway.
- TapExit Delay.
- Set the exit delay for the amount of time you wish.
Disarming your system
To disarm your system using the Keypad
- Enter youruser code.
- Press theDisarmedbutton.
When you enter your home, your Alarm system begins a countdown. This is an Entry Delay, and it gives you time to disarm the system before it goes off.
You can set an Entry Delay of 0 to 180 seconds:
- Tap themenu(☰) on the upper left.
- TapSettings.
- TapModes and Automations.
- TapModes.
- TapHomeorAway.
- TapEntry Delay.
- Set the entry delay for the amount of time you wish.
Panic alarm
This feature lets you send a panic alarm to the monitoring station anytime. To turn it on, press and hold the ✓ and X buttons on the Keypad simultaneously for 3 seconds.
The Keypad will then send an instant alarm signal to the hub, the Keypad LED Ring will quickly blink red three times, and the speaker will play the panic alarm sound.