Proper positioning for your Ring Video Doorbell 4

The proper positioning of your Ring Video Doorbell 4 depends on a number of factors including the layout of your garden, the distance from the front door to the street, objects within the Ring Doorbell's field of view, height of the door and more. This article will describe how your Ring Video Doorbell 4 "sees" the world and the factors that go into good Ring Video Doorbell placement.

Seeing the world two ways

Your Ring Doorbell 4 sees the world in two ways. First, the camera on your Ring Doorbell has a very wide view of the world as illustrated below:

One of the biggest mistakes people make is mounting their Ring Doorbell too high in the mistaken belief that they need to do this in order to catch people's faces. In fact, as illustrated above, viewing faces is not a problem if the Ring Doorbell is mounted at the correct height of approximately 120 cm above the ground.

The second way your Ring Doorbell sees the world is through a network of PIR or "Passive Infrared" motion sensors. These are heat sensors that detect motion by monitoring heat within the detection area. Since people are hotter than the surrounding areas, as a person enters the detection area the heat measurements change. The motion sensors register this change as movement and send out an alert. As illustrated in the image below, the motion sensors have a much more focused field of view than the camera:

The motion sensors in your Ring Video Doorbell are designed to detect motion up to 180 degrees horizontally and from 1.5 to 5 metres outward from the fixture. They're also more sensitive to horizontal movement across the detection area than vertical. Mount the Ring Doorbell too high and you're more likely to catch the heat of passing cars than the heat of incoming visitors.

In addition, you can also use the "motion zone" feature in your Ring Doorbell 4 to set exactly where within its field of vision you want your Ring Video Doorbell 4 to monitor for movement.