Physically installing your Ring Stick Up Cam Battery/Solar (3rd Generation)

For safety and compliance information for this product, click here.

Physically installing up your Stick Up Cam Battery/Solar is a simple process. Simply scroll down for a step-by-step guide. 

Note that you should set up your Stick Up Cam in the Ring app before physically installing it.

Click here for information on setting up your Stick Up Cam Battery/Solar in the Ring app.

1. Charge the battery

The Stick Up Cam Battery is powered by the provided Quick Release Battery Pack. Make sure it is fully charged by plugging it into a USB port using the provided orange cable or any other micro-USB cable. The battery is fully charged when only the green LED is lit.

• Remove the battery cover on your Stick Up Cam by twisting it counterclockwise to unlock.

• If the battery is already inserted, remove the battery.

• After charging, insert the battery into your Stick Up Cam until it locks into place.

2. Choose your location

Your Stick Up Cam will be happy just about anywhere. It can sit on its own stand, mounted to a wall or mounted to the ceiling with a Stick Up Cam Mount (sold separately).

Choose a spot where it can provide the view that you want.

3. Install Stick Up Cam on a table or a shelf

Place your Stick Up Cam at your chosen location. Choose a spot where it can provide the view you want.

Once you’re done, check Live View in the Ring app to make sure you have the view you want.

• If you'd like a downward camera angle:
  • Swivel the base around so that the long side faces the front, then tilt your Stick Up Cam so it points downward.
    

Install security screws if desired (see Step Four).

3. (alternative) Install Stick Up Cam on a wall

Remove the base of your Stick Up Cam by unscrewing it using a standard Phillips head screwdriver (not included).

Re-attach the base to the back of your device with the "UP" arrow pointing upward.

Remove the mounting bracket by sliding it down to remove it from the base.

Hold the bracket against your wall, making sure the "UP" arrow is pointing upward, and mount it with the included screws.

Mount your camera by guiding the grooves in the base on the hooks on the bracket. Slide your Stick Up Cam down to secure it to the wall.

You can now rotate your Stick Up Cam to the desired angle and check out Live View in the Ring app to make sure you have the view you want.

Install security screws if desired (see step 4).

3. (alternative) Install Stick Up Cam on a ceiling

Purchase a Stick Up Cam Mount.

Remove the base of the Stick Up Cam by unscrewing it using a standard Phillips-head screwdriver (not included).

Screw the Stick Up Cam to the Stick Up Cam Mount, using the large silver screw that comes in your Stick Up Cam Mount packaging.

Attach the white rubber pad to the base of the Stick Up Cam Mount by pushing the rubber pad into the base of the mount. Rotate the mount so that the base is above the camera. 

Place the Stick Up Cam where you want to mount it, and hold it in place. Use the three mounting screws to secure the Stick Up Cam Mount base to the ceiling. 

Snap the cover onto the mount and install security screws if desired (see Step Four).

Important: If installing your Stick Up Cam on a ceiling, do not mount the camera upside-down. If you mount the camera upside-down, videos (available with Ring plans) and Live View will be upside-down. You cannot change the orientation of upside-down videos in the Ring app.

4. Install the security screws (optional)

Your Stick Up Cam comes with two optional security screw locations. One secures the battery compartment, and the other secures the mounting bracket to the base. To access them after you’ve mounted your Stick Up Cam, rotate it to either side.

1. Open the battery compartment and/or remove the mounting bracket, then pop out the rubber plug(s).

2. Swivel the base so the long side faces the front.

3. Insert and drive the security screw into the base screw location with a standard Phillips head screwdriver (not included).

Note: If installing your Stick Up Cam with the Stick Up Cam Mount, the security screw location is in the centre of the mount, and you can use the included star-shaped screwdriver to secure it.

4. Turn your Stick Up Cam over to access the battery compartment screw hole, and drive the second security screw.