Charging the battery for your Ring Stick Up Cam Battery/Solar (3rd Generation)

To charge the battery for your Ring Stick Up Cam Battery/Solar (3rd Gen):

1. Open the battery compartment by

   twisting the battery cover counter-clockwise

   to unlock it, then

   removing it

   from your Stick Up Cam. 
2. Remove the battery by pressing the

   release tab

   .
3. Plug your

   micro-USB cable

   to the battery's charging port. Your battery is fully charged when only the solid green light is on.
4. Slide the fully charged battery back into Stick Up Cam until it

   clicks in place

   . 
5. Place the

   battery cover

   back onto your Stick Up Cam.

Use a common micro-USB cable, such as the orange one included in your Ring box. Simply plug it into any USB power source. The battery can take around 5-10 hours to fully charge depending on whether the USB cable is plugged into a USB port or a wall outlet.

Check your battery percentage in the Ring app

1. Tap the

   menu (≡)

   in the top left.
2. Tap 

   Devices

   .
3. Tap the doorbell or camera you want to check.
4. Tap 

   Device Health

   .
5. Check the percentage under

   Battery Level

   .

The battery charge percentage will not change in the Ring app until the fully-charged battery is reinserted into the device.

Extend your Stick Up Cam battery life

You only need one battery for Stick Up Cam Battery to work properly — or to act as backup power for Stick Up Cam Solar. However, if you want extended battery life or don't want to experience any downtime while the battery is charging, a second battery could be helpful.

Purchase a power adapter for your Stick Up Cam for constant power.

Learn more about switching power modes from battery to power adapter with the Ring app.