Search Results
Showing results for scanning-front
Chime, Chime Plus and Chime Pro setup guide
...If your mobile device is not scanning the QR code, tap Set up a non-Ring device or choose manually to continue through the setup process. Allow Location Services when prompted. Select...
Installing Wired Video Doorbell Pro (3rd Gen) Plug-In
...Download the Ring app. 2. Scan the QR code. 3. Remove the protective wrap. 4. Choose a location for your doorbell. Doorbell installation 1. Without plugging in the power adapter...
Installing your hardwired transformer kit
...unclamp the clips that have no wires connected to them. Remove the cover from your home doorbell. Loosen the terminal screw for the wire labeled Front. Open the orange lever on the wire clip and insert this wire, snapping the orange lever down to secure the wire. The red wire supplied with your...
Understanding Floodlight Cam and Spotlight Cam light patterns
...charge gets lower. Floodlight Cam Wired Pro (all generations) Floodlight Cam Wired Pro will display light patterns above the camera lens on the front of the device. Activity Flashing Light Pattern Flashing Light Image Camera getting ready to be activated Solid white light Idle mode No lights...
Reset or power cycle your Ring device
...an internal battery: Setup button is on the back of the device. For models with a removable battery: Setup button is under the faceplate, on the front of the device. For wired models: Setup button is under the faceplate, on the right side of the device. Cameras For Outdoor Cams (previously Stick...
Solar Chargers for battery doorbells
...Kits might prevent part of the panel from receiving direct sunlight, limiting its effectiveness. Firmware updates If you see the blue light on the front of your Solar Charger flashing on and off, it is installing a firmware update...
Enclosure for Ring DIN Rail Transformer
...a third-party transformer, you should refer to manufacturers instructions. Install your DIN Rail Transformer on the back enclosure. Attach the front enclosure. If you haven’t already, mount and set up your Ring Video Doorbell according to the instructions provided with your doorbell. It may...
Remounting Outdoor Cams and Stick Up Cams to fix rotated view
...Make sure the UP arrow on the base is pointing upwards. If you need the camera to look further down, rotate the base so the longer side faces the front and tilt the camera down to your preferred angle. Outdoor Cam Battery/Solar Get step-by-step instructions for installing your Outdoor Cam Battery...
Safety and compliance information for Ring Video Doorbell Wired
...3. Scan the code on the cover page. This identifies your Ring device to make setup fast and easy. 4. Complete your setup. Continue setup in the Ring app...
Charging your Ring Video Doorbell
...the doorbell off the mounting bracket. Charge the battery: Connect the charging cable to your doorbell's charging port. The circular LED on the front of your doorbell will display a solid light when the battery is fully charged. Remove the rubber cap from the charging port if your doorbell has...