Search Results
Showing results for scan
Installing your Pan-Tilt Indoor Cam
...Physically install your Pan-Tilt Indoor Cam with this step-by-step guide. Hardware included Tools needed Download the Ring app. Scan the QR code on your device. Choose a location. Flat installation Place your camera on a level surface with 16.5 cm (6.5 inches) of space in every...
Transfer ownership of a Ring device
...is deceased or medically incapacitated: Tap Set Up a Device at the bottom of the screen. Follow the in-app prompts. If your mobile device is not scanning the QR code, tap Set up a non-Ring device or choose manually to continue through the setup process...
Physically installing your Stick Up Cam Wired
...screw, then pull off the bottom cover. Once removed, it will reveal a USB port, an Ethernet port, an orange button, and a QR code that you'll scan while setting up Stick Up Cam Wired in the Ring app. Note: Keep this cover within reach! When you connect your Ethernet cable to the Stick Up Cam...
Understanding Chime light patterns
...The device is unable to detect the home wifi network. Blue Ring light flashing one second on, one second off Setup mode Blue Ring light pulsing Scanning for available networks Blue Ring light flashing quickly Rebooting Blue Ring light flashing quickly Chime and Chime...
Ring device manuals
...Sie den QR-Code. / Scansionare il codice QR. / Escanea el código QR. / Scan de QR-code. / Skann QR-koden. / Skanna QR-koden. / Skannaa QR-koodi. / Scan QR-koden. / ا ً امسح رمز الاستجابة السريعة ضوئي PH2 1/4 in (6 mm) Battery Doorbell | 2 3. Remove protective film. / Retirez le film de protection...
Installing Floodlight Cam (2nd Gen)
...we recommend that you hire a licensed electrician. 1. Remove the protective wrap from the camera lens. 2. Download the Ring Always Home app. 3. Scan the QR code on your device. WARNING! Professional installation recommended. 4. Shut off power at the consumer unit. NOTE: If you are unsure which...
Installing Floodlight Cam Wired Plus and Pro
...Floodlight Cam Wired Pro or Plus device, follow these steps: Open the Ring app and select Set Up a Device. Then follow the in-app instructions. Scan the QR code found on the front of the manual, or on the back of the camera...
Safety and compliance information for Ring Video Doorbell Wired
...3. Scan the code on the cover page. This identifies your Ring device to make setup fast and easy. 4. Complete your setup. Continue setup in the Ring app...
Installing Wired Video Doorbell Plus (2nd Gen) Plug-In
...Tools included Removal tool Tools needed Phillips-head screwdriver Drill with a 1/4 in (6 mm) masonry bit (optional) 1. Download the Ring app. 2. Scan the QR code. 3. Remove the protective wrap. 4. Choose a location for your doorbell. Doorbell installation 1. Without plugging in the power adapter...
Installing Battery Doorbell Pro (2nd Gen)
...5. Fully charge the battery. 6. Download the Ring app. 7. Scan the QR code on your device. Installation without an existing chime 1. Choose a location for your doorbell. 2. Use the mounting bracket as a guide...