Search Results
Showing results for position-fare
Installing Floodlight Cam Wired Plus and Pro
...like this: If you’re mounting on an eave or overhang, your camera is already in position. If you’re mounting to a wall, rotate the camera into position like this: 5. Remove your existing floodlight With power off at the fuse box, remove the existing floodlight from the wall and disconnect the...
Installing battery-powered doorbells
...your doorbell in the Ring app. Learn more about fixing audio and video issues. Step 3: Positioning your doorbell For the best results, mount the doorbell 1.2 meters above the ground. Learn more about positioning your doorbell. Step 4: Preparing the mounting surface If using a Wedge Kit, Corner Kit...
Installing your Solar Panel (USB-C) (2nd Gen)
...Slide the Solar Panel onto the bracket until it clicks into place. Loosen the adjustment nut and adjust the positioning as required. Tighten the adjustment nut when positioned. We recommend that the Solar Panel is at a 45 degree angle facing the sun. Wrap any spare cable round the cable...
Upgrade your Virtual Key to Virtual Intercom (for residents and staff)
...unit number in the resident directory In the Ring app: Tap Key Access Settings. Tap Display Preferences Toggle Hide Name or Hide Unit to the on position...
Installing Pole and Wall Mount for Cameras and Solar Panels
...Choose a location. If installing a solar panel, ensure the mount is positioned under direct sunlight. Pole installation 1. Choose the right hose clamp. 2. Remove the silicone plugs from both sides of the mount. 3. Loop the...
Installing Stick Up Cam Pro
...Step 3: Positioning your Stick Up Cam Pro for installation Learn how to properly position your camera. Mounting height, angle, and environment can impact motion detection performance and field of view. Positioning on a table or shelf Stick Up Cam Pro includes a pre-installed base for placement on...
Installing lens cover for Outdoor Cam Pro
...Reinsert when the hole is not in use. 4. Place your lens cover on your camera in the open position. NOTE : Unplug your power cable, if necessary. 5. Tighten the screw into the top hole on the back of your camera to secure. 6. Attach the screw...
Safety and compliance information for Stick Up Cam Elite
...hardware that is appropriate for your mounting surface to mount your device. Use caution when installing and mounting your device at an elevated position. Failure to do so may create risk of injury. Watch for small parts! The device and accessories may present a choking hazard to small children...
Installing Outdoor Cam Pro PoE
...camera with its screw. 7. Secure your camera to the mounting plate by sliding until you feel a click. NOTE: Your camera should be in an upright position. Outdoor Cam Pro | 18 EN 8. Rotate your camera and tighten the security screw.9. Plug the included USB-C cable into your camera until the...
Installing Spotlight Cam Pro (2nd Gen) PoE
...19. Tighten the security screw. 20. Install your camera’s decorative cover by sliding until you hear a click to secure. 21. Adjust your camera’s position, if necessary. 22. Apply proper silicone or caulk around the junction box knockouts, between the junction box and junction box cover mount, and...