Search Results
Showing results for walls
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...Tighten the security screw. 14. Reattach the faceplate. Adapter installation FOR INDOOR USE ONLY 1. Install the adapter on the wall with the included screws. WARNING : PoE+ Adapter is for indoor use only. Do not install where it may be exposed to water or moisture. On stucco...
Installing Wired Video Doorbell Plus (2nd Gen) Plug-In
...NOTE: If running the cable through a wall, door, or window, exercise caution for electrical wiring and pipes when drilling. 3. (Optional) If using a corner mount, install the mount over...
Positioning video doorbells and security cameras
...leading to the door, you might need to use a Wedge Kit to adjust the vertical angle. If you are installing your doorbell on a corner or adjacent wall, you can use a Corner Kit to adjust the horizontal angle. Learn more about using a Wedge or Corner Kit...
How to install your Ring Video Doorbell Pro with a hardwired transformer
...or as additional trim when upgrading from a conventional doorbell. 3.1 Uninstall your existing doorbell Unscrew your existing doorbell from the wall and disconnect its wires. 3.2 Mark the holes Using your Ring Doorbell as a template, mark the location of the two mounting holes on your wall. 3.3...
Installing Wired Video Doorbell Pro (3rd Gen)
...On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it...
Installing battery-powered doorbells
...the Corner Kit using the short bracket screws in bag C. Re-insert the battery into the doorbell. Re-attach the faceplate. Installing directly to a wall / Installing to a Wedge or Corner Kit Doorbells with a built-in battery Secure mounting bracket with the four screws from bag A. Hook the doorbell...
Installing Solar Charger for battery-powered doorbells
...screws through the Solar Charger into the wall anchors. Step 3: Mounting the Solar Charger Screw your Ring Solar Charger onto the wall or into the wall anchors. Then, install any Wedge Kits, Corner Kits, or mounting brackets onto the Solar Charger. Step 4: Connecting the doorbell to the Solar...
Physically installing your Stick Up Cam Elite
...The rubber pad should sit between your wall and the base of your Stick Up Cam. 4. Drive the screws. Hold the round part of the base against your wall, rubber side down. Use the integrated level to ensure it’s straight. Then mount it with the included screws...
Installing your Indoor Cam (1st Gen)
...it with the included screws. Mount your Cam Guide the grooves in the base onto the hooks on the bracket. Slide Indoor Cam down to secure it to the wall. Plug it in Once secure, plug the power cord into your Indoor Cam, then plug the adapter into a power socket...
Install your doorbell with a Plug-In Adapter
...the cable down from the outlet to your molding and then choose a path to your doorbell. Secure the cable to the wall with the provided cable clips. The cable can be run through your walls, or through a door or window if desired. Always be careful of existing electrical wiring and pipes when...