Search Results
Showing results for rotate-for
Installing Spotlight Cam Pro (2nd Gen) Plug-In
...its screw. 6. Secure your camera to the mounting plate by sliding until you feel a click. NOTE: Your camera should be in an upright position. 7. Rotate your camera and tighten the security screw. 8. Adjust your camera’s position and tighten the ball joint to secure in place. 9. Plug the power...
Installing Spotlight Cam (2nd Generation)
...its screw. 6. Secure your camera to the mounting plate by sliding until you feel a click. NOTE: Your camera should be in an upright position. 7. Rotate your camera and tighten the security screw. 8. Adjust your camera's position and tighten the ball joint to secure in place. Battery setup and...
Installing Stick Up Cam Pro
...If using the Plug-In Adapter, you can secure the power adapter to the wall with the included mounting screws. Step 10: Adjusting the camera angle Rotate the camera to focus on the area you wish to monitor. Look at Live View in the Ring app to make sure the field of view is accurate. Tighten the...
Installing Floodlight Cam Wired Plus and Pro
...to the floodlight circuit, we recommend you hire a licensed electrician. 4. Prep your Floodlight Cam Wired Pro or Plus for installation First, rotate the light out of the way, like this: If you’re mounting on an eave or overhang, your camera is already in position. If you’re mounting to a wall...
Installing your Indoor Cam (1st Gen)
...the adapter into a power socket. Adjust the view Now check out the live video in the Ring app to make sure you have the view you want. Indoor Cam rotates on its base, so adjust the view as needed...
Use Bird's Eye Zones for more relevant Motion Alerts
...map until the device icon is in the right position, marking the location of your device as accurately as you can. Tap Continue . Use the slider to rotate the map, marking the direction of your camera’s view. Tap Continue . For cameras only: For optimal motion detection, set the correct mounting...
Ring device manuals
...of the base against your ceiling, rubber-side down. Then mount it with the included screws. Rotate the stand above the camera: The whole stand can rotate on its axis. Before ceiling- mounting, rotate the stand 180 degrees so the base is positioned above your Stick Up Cam. Remove the plastic...
Installing Floodlight Cam (2nd Gen)
...side of the mounting plate. 9. Slide the camera fixture onto the mounting plate and attach using the included hex nuts. 10. Rotate the lights out of the way, then rotate your camera clockwise. 11. Remove the shank from the included screwdriver and use the handle to tighten the hex nuts. Then...
Installing Pole and Wall Mount for Cameras and Solar Panels
...9. Rotate your security camera and remove the rubber cap on the base. 10. Tighten the security screw included with your security camera. 11. Refer to your...
Ring Gutter Mount Installation Guide
...Up Cam. 3. For Spotlight Cam For Stick Up Cam 4. Half-round gutter shown. More gutter types can be found at the end of this user guide. 5. 6. Rotate the knob to secure the support against the front of the gutter...