Search Results
Showing results for guide
Fixing offline devices
...Network and follow the prompts. Watch for light patterns and audio cues from the device as it reconnects. If the reconnection fails, use our guide for resolving setup issues...
Set up and install Ring Intercom
...the model number, check near the wires on the control board, on the back, or on any stickers. If you’re having trouble finding this, check our guide to find your intercom brand and model. Step 3: Wire your Intercom Take the cable from your Ring Intercom box, as indicated in the Ring app...
Installing lens cover for Outdoor Cam Pro
...the back of your camera with its screw. 8. Reattach the mounting plate by sliding until you hear a click to secure. 9. Refer to your camera setup guide to attach your camera to the wall. Using the lens cover 1. To cover your camera, slide the lens cover to the locked position until you feel a...
Installing Wired Video Doorbell (2nd Gen)
...the cable through a wall, door, or window, exercise caution for electrical wiring and pipes when drilling. 4. Use the mounting bracket as a guide to mark screw holes on the wall...
Installing Stick Up Cam Pro
...battery and plug-in to take advantage of Dual Power mode. Watch the video guide for installing a Stick Up Cam Pro Battery or Solar Watch the video guide for installing a Stick Up Cam Pro Plug-In Hardware included Mounting screws (A) Mounting anchors (A) Cable Clips (Plug-In and Solar) (B...
Installing Outdoor Cam Pro Plug-In
...into an outlet. Wall installation 1. Slide the mounting plate in the direction opposite to the UP arrow to remove. 2. Use the mounting plate as a guide to mark screw holes on the wall with 5.5 in (14 cm) of space in every direction. 3. Install the mounting plate with the UP arrow pointing up. On...
Installing your Pan-Tilt Indoor Cam
...Physically install your Pan-Tilt Indoor Cam with this step-by-step guide. Hardware included Tools needed Download the Ring app. Scan the QR code on your device. Choose a location. Flat installation Place your camera on...
Installing Hardwired Kit for Outdoor Cam Pro and Spotlight Cam Pro (2nd Gen)
...rubber cap. 2. Tighten the included hex joint onto the back of your camera, ensuring the UP arrow is pointing up. 3. Refer to your camera setup guide to remove the rubber plug from your camera’s power port, if necessary. 4. Plug the USB-C cable on the Hardwired Mount into your camera, ensuring...
Installing Stick Up Cam
...Learn more about installing your Pan-Tilt Mount. Watch the video guide for installing the Stick Up Cam Battery or Solar Watch the video guide for installing the Stick Up Cam Plug-In Hardware included Tools needed Phillips-head screwdriver Drill with 6 mm drill bit (optional) Step 1...
Installing Doorbell Retrofit Kit
...2. Remove your existing doorbell or intercom, if necessary. NOTE: Keep the screws safe for now. 3. Use the guide to identify holes D and remove the correct plugs. 4. (Optional) Prime or paint your kit to match your home before installation. 5. Install the...