Search Results
Showing results for drill
Installing Stick Up Cam Pro
...into the wall. If installing on a masonry (concrete, brick, or stucco) surface, mark four screw holes using the plate as a guide. Drill pilot holes using a 6 mm drill bit. Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors...
Installing Wired Video Doorbell Pro (3rd Gen) Plug-In
...corner mounts can be stacked together. We do not recommend more than two. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors. (Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with...
Installing Pole and Wall Mount for Cameras and Solar Panels
...clamp reaches the side of the mount, re-insert and tighten until fully secured. Wall installation Use the drilling template for your mount as a guide to mark screw holes on the wall. Drilling template Print page at 100%. If credit card fits here, page size is accurate. 1. Attach the mount using...
Installing battery-powered doorbells
...device, install before mounting the doorbell. Installing on a wood surface Drill and wall anchors are not needed. Installing on a masonry surface Using the marked screw hole locations, drill pilot holes using a 6 mm drill bit...
Installing your Pan-Tilt Indoor Cam
...with the UP arrow pointing opposite of your desired viewing direction. On stucco, brick, or concrete, use a 5 mm (3/16 inches) masonry bit to drill holes for the included wall anchors. Secure your camera to the mounting plate by sliding until you feel a click. Plug in the power cable. Anchor...
Installing Floodlight Cam Wired Pro (2nd Gen)
...2. On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors. Floodlight Cam Pro (2nd Gen) | 7EN 3. Feed the wires through the mounting plate. 4. Install the mounting...
Installing Outdoor Cam Pro PoE
...Install the adapter on the wall or ceiling with the included screws. On stucco, brick, or concrete, use a 5 mm masonry bit to drill holes for the wall anchors included with your adapter. Plug the other end of the USB-C cable into the adapter until the indicator line disappears...
Installing Outdoor Cam Plus Plug-In
...holes on the wall. 3. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. 4. Unclasp the camera mount...
Installing PoE+ Converter Mount
...On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors. Routing the Ethernet cable through the side: 3a. Align the grommet, spacer, and mounting plate, then route...
Installing Ring Video Doorbell Wired
...the two mounting holes on your wall. 10. Install the anchors from Bag A (optional) On stucco, brick or concrete, use a 1/4" (6mm) masonry bit to drill holes in your wall, then insert the included wall anchors. Note : If you're installing on wood or siding, you can skip this step. 11...