Search Results
Showing results for -side
Installing Ring Plug-In Adapter (2nd Generation)
...terminals on the rear of your Ring Doorbell. If you are connecting to Outdoor Siren, you must correctly connect the positive (+) and negative (-) sides...
Installing Floodlight Cam Wired Pro (2nd Gen)
...terminal block. NOTE: Gently tug on the wires to ensure they are securely connected. 9. Route the wires from your camera fixture along the right side of the mounting plate. 10...
Control pan-tilt cameras in the Ring app
...General Settings . Tap Home Position . Your camera will automatically calibrate. Note: Make sure there is 16.5 cm (6.5 inches) of clearance on all sides when installing your camera to allow this movement. Move your camera to the desired Home Position using the arrow buttons in the app...
Installing PoE+ Converter Mount
...Routing the Ethernet cable through the side: 3a. Align the grommet, spacer, and mounting plate, then route the Ethernet cable through the slot in the spacer and the mounting plate. Important...
Two-way communication through Amazon Echo devices
...Ring devices should appear and automatically connect to Alexa. If you don't want Alexa to integrate with a Ring device, tap Forget on the right side...
Installing your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...cables and put them to one side. Remove the 230 V high voltage line (brown) and neutral (blue) cables from the input terminals and place to one side, ensuring that these are not touching any other cables, metal or conductive surfaces. Depending on the age of the home, the wires may not match the...
Installing Outdoor Cam Plus Battery
...code on your device. 7. Choose a location. Flat installation 1. Place your camera on a level surface. NOTE: For a downward angle, face the longer side of the base toward the front and tilt your camera down accordingly. 2. Tighten the security screw on the battery cover. Wall installation 1. Slide...
Installing Stake Mount for Solar Panels and Cameras
...wired mount arm plate adapter. 4. Using the bottom oval slot, secure your camera with the included hand screw. 5. NOTE: For best results, align the side edges of the hand screw with the indented tracks on the back of your mount arm plate. 6. Plug in the power cable. Spotlight Cam 1. Remove the...
Installing your Stick Up Cam Battery (2nd Gen)
...the base toward the rear. If you're mounting Stick Up Cam on a ceiling: Swivel the base above the camera. Make sure the camera is mounted right side up. You will not be able to change upside-down videos in the Ring app. Push the rubber pad into the bottom of the base. Drive the screws Hold the...
Physically installing your Stick Up Cam Elite
...pad should sit between your wall and the base of your Stick Up Cam. 4. Drive the screws. Hold the round part of the base against your wall, rubber side down. Use the integrated level to ensure it’s straight. Then mount it with the included screws...