Search Results
Showing results for -install
Installing Solar Charger for battery-powered doorbells
...behind the plate. Do not drill into your home's electrical wiring. Installing on a wood surface Screw the Solar Charger directly into the wall. Installing on a masonry (concrete, brick, or stucco) surface Mark four screw holes using the plate as a guide...
Installing Outdoor Cam Plus Plug-In
...Learn how to install Outdoor Cam Plus for plug-in use by following these steps. Note: Outdoor Cam Plus has a larger mounting plate than previous Outdoor Cams or Stick Up Cams. Mounting plates from other cameras cannot be used when installing Outdoor Cam Plus. Outdoor Cam Plus...
Installing your Pan-Tilt Indoor Cam
...with 16.5 cm (6.5 inches) of space in every direction and plug in. Wall installation Use the mounting plate as a guide to mark screw holes on the wall with 16.5 cm (6.5 inches) of space in every direction. Install the mounting plate with the UP arrow pointing up. On stucco, brick, or...
Installing lens cover for Outdoor Cam Pro
...not in use. Lens Cover for Outdoor Cam Pro | 2EN 4. Place your lens cover on your camera in the open position. NOTE: Unplug your power cable, if necessary. 5...
How to physically install your Ring Video Doorbell 3 without an existing doorbell
...Be sure you use all four included screws. 6. Install the faceplate Place one of the provided faceplates on your Ring Video Doorbell by slotting it in at the top and clicking it into place. 7...
Installing Wired Video Doorbell Plus (2nd Gen) Plug-In
...Optional) If using a wedge mount, install the mount over your doorbell wires using the screws included with your wedge kit, ensuring it is facing down. NOTE: Multiple wedge mounts can be...
Installing Ring Video Doorbell Wired
...of the two mounting holes on your wall. 10. Install the anchors from Bag A (optional) On stucco, brick or concrete, use a 1/4" (6mm) masonry bit to drill holes in your wall, then insert the included wall anchors. Note : If you're installing on wood or siding, you can skip this step. 11...
Installing PoE+ Adapter with Mount
...Install your camera’s decorative cover by sliding until you hear a click to secure. 22. If installing Outdoor Cam Plus, use decorative cover 1. If installing Outdoor Cam Pro, use decorative cover 2. 23. Adjust your camera’s...
Installing Spotlight Cam Pro (2nd Gen) Plug-In
...NOTE: For best results, avoid locations with nearby objects that can interfere with your camera’s field of view. 3. Install the mounting plate with the UP arrow pointing toward your desired viewing direction. On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry...
Installing Stake Mount for Solar Panels and Cameras
...Learn how to install Stake Mount for Solar Panels and Cameras by following these steps. Hardware included Tools needed Installation Choose a location. If installing a solar panel, ensure the mount is positioned under direct sunlight. 1...