Search Results
Showing results for uses
Safety and compliance information for Hardwired Kit for Cameras
...may feel hot to touch. Please wait 30 minutes after the device is no longer in use before touching or moving. Only use accessories that are recommended by the manufacturer. Use of third-party accessories may lead to damage to your device or the accessory and may cause fire, electric shock, or...
Installing Floodlight Cam Wired Pro (2nd Gen)
...mounting surface. 11. Rotate the lights out of the way, then your rotate camera clockwise. 12. Remove the shank from the included screwdriver and use the handle to tighten the hex nuts. Then, cover with the included hex nut caps...
Troubleshooting issues using the Ring app
...to sign in on a different mobile phone or tablet. “Invalid Password Reset Token” error: Request a new password reset link. Make sure you are only using the password reset link from the most recent Ring email. Sign-in issues If you see the "Cloud server unreachable” error message, try changing your...
Installing Video Doorbell Pro Retrofit Kit
...the steps below to replace a Ring Video Doorbell with a Ring Video Doorbell Pro using the Retrofit Kit: Uninstall your existing Ring Video Doorbell. Place the Retrofit Kit on the mounting holes that were used for your previous Ring Video Doorbell installation...
Using Chime Pro Placement Test to optimise your wifi
...as necessary until you achieve a good result. If you skipped any steps after setting up Chime Pro, you may need to go back and complete them for all your features to work properly...
Installing Wired Video Doorbell Pro (3rd Gen) PoE
...Optional) If using a corner mount, install the mount over the USB-C cable using the bottom holes in the top and bottom sections, ensuring it is facing in your desired viewing direction. On stucco, brick, or concrete, use a 6 mm (1/4 in) masonry bit to drill holes for the included wall anchors...
Installing No-Drill Mount for Ring battery doorbells
...on a Wedge Kit, insert screw a into a threaded hole on either side of the bottom opening. For best results, only use one Wedge or Corner Kit. 5. Attach the mounting bracket using the four included mounting screws. 6. Attach your doorbell to the mounting bracket. 7...
Hardwiring your battery-powered Ring doorbell
...the doorbell. Installing on a wood surface Drill and wall anchors are not needed. Installing on a masonry surface Using the marked screw hole locations, drill pilot holes using a 6 mm drill bit. Insert the included wall anchors. Step 5: Connect the doorbell wires or Plug-In Adapter Using...
Ring Spotlight Cam Battery Installation
...holes, then insert wall anchors before installing the screws. If installing on a wooden surface, use the install screws to screw the mounting bracket directly into your wall. Mark your holes using the mounting bracket as a guide...
Contact Us
...Chat or speak with a Customer Support associate....
Support