Search Results
Showing results for terminal
Installing Ring Video Doorbell Wired
...the wires Look for terminal screws with wires connected. In order to provide power to your new doorbell we must bypass the wires that are connected either side of the doorbell mechanism. In the example below, the terminals 0 and 3 are across the doorbell mechanism, and terminals 1 and 2 are...
How to install your Ring Video Doorbell Pro with a hardwired transformer
...mechanism (or in electrical terms, its solenoid or coil), making it produce sound. If you look closely, you can see thin wires, running from terminals 0 and 3 to the hidden solenoid. By contrast, terminals 1 and 2 are connected directly to each other via a thin wire (meaning they aren’t...
Installing Floodlight Cam Wired Plus and Pro
...the wires to the terminals With power still turned off at the fuse box, slide the earth wire into the centre bay on the bottom of the terminal block and tighten with the flathead end of the included screwdriver. Then slide the line wire into the bay on the bottom of the terminal block marked “L...
Floodlight Cam Installation Guide
...earth wire Connect your earth wire to the earth post on Floodlight Cam, and secure it in place. 7 . Identify the neutral and line terminals The terminals on the Floodlight Cam are marked N (neutral) and L (line). Identify these and wire accordingly. Depending on the age of the home, the wires may...
Installing your Wired Video Doorbell Pro (formerly Video Doorbell Pro 2)
...ensure these are going into the correct input terminals). Connect the doorbell wires to + & - (doorbell wires can go in either terminal). Ensure the terminals are tightened properly with a screwdriver. 4. Uninstall your existing doorbell button Remove your doorbell from the wall...
Installing Ring Plug-In Adapter (2nd Generation)
...Step 3: Attach the wires Attach the power cables to the terminals on the rear of your Ring video doorbell. It doesn't matter which cable is connected to which terminal. The device will work with either cable connected to either terminal. Step 4: Install your doorbell Physically install your...
Installing Solar Charger for battery-powered doorbells
...to the Solar Charger For doorbells with a removable battery: Loosen the screw terminals on the back of your doorbell. Insert the Solar Charger wire connector with UP side facing forward. Tighten the terminal screws. Fit your doorbell into the Solar Charger and secure with screws. Tuck the...
Installing Floodlight Cam Wired Pro (2nd Gen)
...to hook it onto the mounting plate. NOTE: Ensure the buckle and hook are secure before releasing. 8. Connect the wires from your camera to the terminal block. NOTE: Gently tug on the wires to ensure they are securely connected. 9. Route the wires from your camera fixture along the right side of...
Installing Wired Video Doorbell Plus (2nd Gen)
...transformer from its housing unit. 8. Connect power to the bottom L & N terminals and the doorbell to positive & negative terminals (doorbell wires can go in either terminal). 9. (Optional) If using a corner mount, install the mount over your doorbell wires using the large oval holes, ensuring it...
Installing your hardwired transformer kit
...set Doorbell Type to ‘None’. If you need to remove your doorbell wires from the Pro Power Kit, press down on the lever on the rear to open the terminal clamps, and pull the wires straight out...