Fixing audio and sound issues with your Ring device
If you are experiencing warped sound or no audio from your Ring device, there are a few things you can check and try.
Things to check
Check the volume on your mobile device.
Make sure the external volume is up on your mobile device (on the device where you're viewing your Ring videos or Live View).
Make sure your mobile device has service.
If your phone or tablet has poor service or internet, it could be affecting Live View or your video downloads.
See if your mobile device is connected to Bluetooth.
Try turning Bluetooth off, then open Live View or view a recorded Ring video.
Check your Ring device's signal strength. Poor wifi can often cause Ring device issues, including with recording or capturing audio.
- Open the Ring app
- Tap the topmenu (☰)
- TapDevices
- Choose your Video Doorbell or Security Camera
- Tap theDevice Settingstile
- TapDevice Health
- Under the Network section, you'll see your device'sSignal Strength
If your Signal Strength (RSSI) is amber or red, your Ring device likely has a poor connection to your location's wifi. Try moving your wifi router closer to your Ring device.
Learn more about offline devices.
Things to try
![Live_View_Images_Activated_and_Inactivated.png](https://d1kusojqr3t85q.cloudfront.net/jrz4hnnvdyct/4m3mNxObxVDYTOvuZj1tK3/2ed753710e6a2d3bb434075a0b9557c0/image.jpg?w=375)
Test Live View and Two-Way Talk.
Open Live View in the Ring app and see if your Ring device's microphone is enabled.
- Open the Ring app
- Tap the topmenu (☰)
- TapDevices
- Choose your Video Doorbell or Security Camera
- Tap theLive Viewbutton
- Check to make sure the microphone icon is enabled or tap the green phone icon.
Check your audio privacy settings.
You may have your audio settings turned off for privacy reasons.
- Open the Ring app
- Tap the topmenu (☰)
- TapDevices
- Choose your Video Doorbell or Security Camera
- Tap theDevice Settingstile
- TapPrivacy Settings
- Make sureAudio Streaming and Recordingis enabled
Reboot your Ring Video Doorbell or Security Camera.
If you Ring device is connected to wifi, you can attempt to reboot it.
- Open the Ring app
- Tap the topmenu (☰)
- TapDevices
- Choose your Video Doorbell or Security Camera
- Tap theDevice Settingstile
- TapDevice Health
- Scroll down and tapReboot This Device
- Wait a few minutes for your device to reboot