Hands installing a Wired Video Doorbell Plus (2nd Gen) on white wall

Installing Wired Video Doorbell (2nd Gen)

Safety and compliance information for Wired Video Doorbell (2nd Gen).

Learn how to install Wired Video Doorbell (2nd Gen) plug-in.

Download the user manual for Wired Video Doorbell (2nd Gen) plug-in

Hardware included

Illustration to show hardwired included with your Wired Doorbell (2nd Gen) plug-in

Tools needed

Phillips-head screwdriver

Illustration of a power drill to use as an installation tool.

Drill with a 1/4 in (6 mm) masonry bit (optional)

1. Remove the protective wrap.

Illustration indicating to remove the protective wrap from the Ring Camera.

2. Download the Ring app.

Illustration showing to download the Ring App on the mobile device.

3. Scan the QR code on your device.

Illustration to show the location of the QR code on the back of the device.

Doorbell installation

PLUG-IN ADAPTER FOR INDOOR USE ONLY

1. Choose a location for your doorbell.

Illustration to show a doorbell installed next to a door at a height of 1.2 metres or 4 feet.

2. Without plugging in the power adapter, run the power cable from the indoor outlet to the location you're installing your doorbell.

NOTE: Use an indoor outlet close to the install location.

Illustration to show running the power cable from the indoor outlet to the doorbell location, without plugging it in.

3. Secure the power cable with the included cable clips.

NOTE: If running the cable through a wall, door, or window, exercise caution for electrical wiring and pipes when drilling.

Illustration to show securing the power cable with the included cable clips, labelled B.

4. Use the mounting bracket as a guide to mark screw holes on the wall.

Illustration to show using the mounting bracket as a guide to mark screw holes on the wall.

5. Install the mounting bracket with the included screws.

Illustration to show installation of the mounting bracket directly over your doorbell wiring with the included screws.

NOTE: On stucco, brick, or concrete, use a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors.

Illustration to show using a 1/4 in (6 mm) masonry bit to drill holes for the included wall anchors for stucco, brick, or concrete, and use just screws for wood installation.

6. Connect the power cable to your doorbell's wire terminals, ensuring the terminal wires are not in contact with each other.

NOTE: You can attach any wire to any terminal.

Illustration to show connecting the doorbell wiring to your doorbell’s wire terminals.

7. Mount your doorbell by hooking it over the bracket and pushing down.

Illustration to show mounting the doorbell by hooking it over the bracket.

8. Tighten the security screw.

Illustration to show tightening the security screw on the bottom of the doorbell using a Phillips screwdriver.Illustration to show the underside of the doorbell with the security screw visible.

9. Plug in the power adapter.

Illustration to show plugged in power adapter receiving power.

10. Ring your doorbell to ensure everything is properly connected.

Illustration to show the button on the front of the device, to ring your doorbell to test it.

Last updated 0 days ago

Related Articles

    English (ANZ)Change
    ©2026 Ring LLC or its affiliates
    |
    ||