Installation image for Outdoor Cam Pro

Installing lens cover for Outdoor Cam Pro

Safety and compliance information for lens cover for Outdoor Cam Pro.

Get step-by-step installation instructions for your lens cover for Outdoor Cam Pro.

View or download the manual for the Lens Cover for Outdoor Cam Pro.

Tools needed

Illustration of a cross point screw driver needed for installation.

Phillips-head screwdriver

NOTE: Do not use a drill during installation. Using a drill may damage the lens cover or your device.

Flat installation

FOR INDOOR USE ONLY

1. Slide the mounting plate in the direction opposite to the UP arrow to remove.

Illustration showing how to remove the mounting plate by Sliding it in the direction opposite of the UP arrow.

2. Unscrew to detach the camera mount.

Illustration showing how to unscrew the bottom screw to detach the camera mount.

3. Remove the top rubber cap on the back of your camera.

NOTE: Store the rubber cap in a safe place. Reinsert when the hole is not in use.

Illustration showing to remove the top rubber cap on the back of the camera.

4. Place your lens cover on your camera in the open position.

NOTE: Unplug your power cable, if necessary.

Illustration showing how to place your lens cover on your camera in the open position.

5. Tighten the screw into the top hole on the back of your camera to secure.

Illustration showing to tighten the screw into the top hole on the back of the camera to secure.

6. Attach the mount to the bottom of your camera with its screw.

Illustration showing to attach the mount to the bottom of the camera with its screw.

7. Reattach the mounting plate by sliding until you hear a click to secure.

Illustration showing how to reattach the mounting plate by sliding until you hear a click to secure.

Wall Installation

FOR INDOOR USE ONLY

1. Slide the mounting plate in the direction opposite to the UP arrow to remove.

Illustration showing how to remove the mounting plate by Sliding it in the direction opposite of the UP arrow.

2. Unscrew to detach the camera mount.

Illustration showing how to unscrew the bottom screw to detach the camera mount.

3. Remove the two rubber caps on the back of your camera.

NOTE: Store the rubber caps in a safe place. Reinsert when the hole is not in use.

Illustration showing to remove the two rubber caps on the back of your camera.

4. Place your lens cover on your camera in the open position.

NOTE: Unplug your power cable, if necessary.

Illustration showing how to place your lens cover on your camera in the open position.

5. Tighten the screw into the top hole on the back of your camera to secure.

Illustration showing to tighten the screw into the top hole on the back of the camera to secure.

6. Attach the screw cap to the bottom of your camera.

Illustration showing how to attach the screw cap to the bottom of your camera using a cross point screwdriver.

7. Attach the camera mount to the back of your camera with its screw.

Image showing how to attach the camera mount to the back of your camera with its screw using a cross point screw driver.

8. Reattach the mounting plate by sliding until you hear a click to secure.

Illustration showing how to reattach the mounting plate by sliding until you hear a click to secure.

9. Refer to your camera setup guide to attach your camera to the wall.

Illustration directing users to refer to the camera setup guide to attach the camera to the wall.

Using the lens cover

1. To cover your camera, slide the lens cover to the locked position until you feel a click.

Illustration showing how to cover your camera by sliding the lens cover to the locked position until you feel a click.

2. To uncover your camera, slide the lens cover to the unlocked position until you feel a click

Illustration showing how to uncover the camera by sliding the lens cover to the unlocked position until you feel a click.

Last updated 1 month ago

Related Articles

    English (US)Change
    ©2025 Ring LLC or its affiliates
    |
    ||