Safety and Compliance Information for Ring Contact Sensor (2nd Generation)

Important Product Information

SAFETY INFORMATION: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE. WARNING: Your device should only be used in accordance with the specific instructions for use and intended purpose of the device. Using your device in any way other than its intended purpose could cause injury to yourself or others, and/or damage to the device or property. WATCH FOR SMALL PARTS! Your device and accessories may present a choking hazard to small children. Keep them out of reach of small children. CAUTION: The device is not waterproof and as such should not be submerged in water, doing so could cause injury to yourself, others and/or damage to the device. CAUTION: To reduce the risk of falling, take extra caution when using a ladder or similar equipment to mount the product.

BATTERY WARNING: CONTAINS COIN BATTERY, KEEP OUT OF REACH OF CHILDREN.

WARNING

• INGESTION HAZARD:

  This product contains a button cell or coin battery.
• DEATH

  or serious injury can occur if ingested.
• A swallowed button cell or coin cell battery can cause

  Internal Chemical Burns

  in as little as

  2 hours

  .
• KEEP

  new and used batteries

  OUT OF REACH of CHILDREN

  .
• Seek immediate medical attention

  if a battery is suspected to be swallowed or inserted inside any part of the body.

This product contains button or coin batteries which are hazardous and must be kept away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. Lithium button/coin batteries can cause severe or fatal injuries in 2 hours or less if it is swallowed or placed inside any part of the body. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

SYMPTOMS FROM BATTERY INGESTION

No obvious symptoms: Unfortunately, it is not obvious when a button or coin battery is stuck in a child’s esophagus (food pipe). There are no specific symptoms associated with this. The child might:

• Cough, gag or drool a lot;
• Appear to have a stomach upset or a virus;
• Be sick;
• Point to their throat or stomach;
• Have a pain in their abdomen, chest or throat;
• Be tired or lethargic;
• Be quieter or more clingy than usual or otherwise “not themselves”;
• Lose their appetite or have a reduced appetite; and
• Not want to eat solid food / be unable to eat solid food.

These sort of symptoms vary or fluctuate with the pain increasing and then subsiding. A specific symptom to button or coin battery ingestion is vomiting fresh (brightened) blood. If the child does this, seek immediate medical help. The lack of clear symptoms is whey it is important to be vigilant with “flat” or spare button or coin batteries in the home and the products that contain them.

ADDITONAL BATTERY WARNINGS

• Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in the household trash or incinerate.
• Even used batteries may cause severe injury or death.
• Call a local poison control center for treatment information.
• Non-rechargeable batteries are not to be recharged.
• Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
• Ensure the batteries are installed correctly according to polarity (+ and -).
• Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
• Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
• Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

MAINTAING YOUR RING CONTACT SENSOR

The Ring Contact Sensor is for indoor use only. Use only accessories supplied with your device, or specifically marketed for use with your device, to power your device. PRODUCT SPECIFICATIONS Device Name: Ring Contact Sensor Model Number: 54T3S2 Electrical Rating: 2 x 3V Lithium CR2032 Temperature Rating: 32°F to 120°F (0°C to 49°C) RECYCLING YOUR DEVICE PROPERLY In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to amazon.com/devicesupport. TERMS OF SERVICE AND WARRANTY By purchasing or using the product, you agree to the Terms of Service found at ring.com/terms. For information on our warranty visit ring.com/legal.

FOR CONSUMERS IN THE UNITED STATES

Supplier’s Declaration of Conformity — Compliance Information Statement Device Name: Ring Contact Sensor Model Number: 5AT3S2 Responsible Party and Party issuing Supplier’s Declaration of Conformity Ring LLC, 12515 Cerise Ave, Hawthorn, CA 90250, USA www.ring.com / legal@ring.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiation radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is not guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Pursuant to Section 15.21 of the FCC rules, changes or modifications to a Product by the user that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device meets the FCC Radio Frequency Emission Guidelines. Information on the product is on file with the FCC and can be found by inputting such Product’s FCC ID (which can be found on the device) into the FCC ID Search from available at fcc.gov/oet/ea/fccid. Information Regarding Exposure to Radio Frequency Energy The output power of the radio technology used in the Products is below the radio frequency exposure limits set by the FCC. Nevertheless, it is advised to use this product in such a manner that minimizes the potential for human contact during normal operation. This device should be installed and operated with at least 20 cm between the radiator and your body.

FOR CONSUMERS IN CANADA

Innovation, Science and Economic Development Canada (ISED) Compliance This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.