Flashing Light Patterns for Indoor Cam
Your Indoor Cam has an LED light on the front which shows the status of your device. See the chart below for the meaning of different types of light flashes.
Status | Flashing Light Pattern |
Camera is idle | LED is off |
Camera is in Setup Mode | Blue light with slow blinking pattern |
Camera is starting up | Solid blue light |
Firmware update in progress | Blue light that blinks on and off, then stays on for two seconds |
Camera is recording | Solid blue light |
Two-way talk/speaker enabled | Very slow, pulsing blue light |
Siren is sounding | Alternating red and blue light
Blue light blinks rapidly (2nd Gen) |
Setup is successful | Blue light blinks on for five seconds |
Setup has failed, incorrect password | Red light flashes on and off. Quick blue flash between two slow flashes (2nd Gen) |
Setup failed to connect to wifi | Red/blue light flashes on/off Blue light flashes three times |
Setup failed to connect to Indoor Cam | Green light flashes on and off Blue light flashes on and off (2nd Gen) |
Camera is booting up | Solid blue light until booting up is complete |
Factory restore | light blinks on and off for five seconds, indicating device will reboot Blue light flashes rapidly for five seconds, then stays solid blue for five seconds (2nd Gen) |
Last updated 1 week ago