Ring Video Doorbell mounted on light blue door frame

Installing Wedge Kit for Wired Doorbell Plus (2nd Gen)

Safety and compliance information for Wedge Kit for Wired Doorbell Plus (2nd Gen)

Download the manual for Wedge Kit for Wired Doorbell Plus (2nd Gen)Download the manual for Wedge Kit for Wired Doorbell Plus (2nd Gen) (Canadian French)

Follow these step-by-step installation instructions for your Wedge Kit for Wired Doorbell Plus (2nd Gen).

Hardware Included

Tools Needed

Illustration of a cross point screwdriver needed for installation.

Phillips-head screwdriver

Illustration of a battery powered drill, recommended for installation.

Drill with a 6 mm masonry bit (optional)

1. Refer to your doorbell setup guide to prepare your install location.

2. Use the wedge mount as a guide to mark screw holes on the wall, if necessary.

Illustration to show where to mark the screw holes for your Wedge Kit.

NOTE: Mark the both top holes or both bottom holes, depending on your desired installation location.

3. Install the mount over your doorbell wires or on the wall with the included screws, ensuring it is facing down.

Illustration to show how to install the mount over your doorbell wires or on the wall with the included screws.

On stucco, brick, or concrete, use a 6 mm masonry bit to drill holes for the included wall anchors.

Stucco, brick and wood installation for Wedge Kit for Wired Doorbell Pro (3rd Gen)

4. If installing multiple wedge or corner mounts, insert the included screws through both mounts to hold them together.

NOTE: We do not recommend using more than two.

Illustration to show stacking multiple wedge mounts.Illustration to show screws to use to stack multiple wedge mounts.Illustration to show stacking wedge and corner mounts.Illustration to show screws to use with one wedge mount and one corner mount.Illustration to show which screws to use when stacking one wedge mount and two corner mounts.

5. Attach your doorbell’s mounting bracket over the mount.

Illustration to show the mounting bracket position on the wedge mountIllustration to show the screws to use to attach the mounting bracket to the wedge mount.

6. Refer to your doorbell setup guide to complete setup.

Last updated 1 month ago

Related Articles

    English (US)Change
    ©2025 Ring LLC or its affiliates
    |
    ||