Person plugging in a Ring Pan Tilt Indoor Camera on a flat surface.

Installing Pan-Tilt Indoor Cam

Physically install your Pan-Tilt Indoor Cam with this step-by-step guide. 

Hardware included

Diagram of included hardware of a screw, wall plug and mounting bracket diagram.

Tools needed

Illustration of a cross point screwdriver needed for installation.Illustration of a power drill to use as an installation tool.
  1. Download the Ring app.
  2. Scan the QR code on your device.
  3. Choose a location.

Flat installation

Place your camera on a level surface with 16.5 cm (6.5 inches) of space in every direction and plug in.

Plug in power cable to back of device of a flat surface installation of the Ring Indoor Cam Plug-in with Pan-Tilt.

Wall installation

  1. Use the mounting plate as a guide to mark screw holes on the wall with 6.5 inches (16.5 cm) of space in every direction.
    Mark holes with a pencil using the mounting bracket as a template for Ring Pan-Tilt ceiling Mounting Bracket.
  2. Install the mounting plate with the UP arrow pointing up.
Screw in the mount for installation of the Ring Pan-Tilt for the Indoor Cam Plug-in.

Installation materials with drill, wall anchor, and screws.

On stucco, brick, or concrete, use a 3/16 inch (5mm) masonry bit to drill holes for the included wall anchors.

  1. Run the power cable through the hole in the mounting bracket and plug in.
    Pass the power cable through the center hole of the Ring Pan-Tilt wall mounting bracket to then plug into the Indoor Cam.
  2. Secure your camera to the mounting bracket by sliding until you feel a click.
    Illustration of how to secure the cam to the wall mounting bracket by sliding until you feel a click.
  3. Secure your camera and bracket to the mounting plate by sliding until you feel a click.
    Slide the wall mount for the Ring Pan-Tilt Indoor Cam Plug-in onto the bracket for wall mount installation.

Ceiling installation

  1. Use the mounting plate as a guide to mark screw holes on the ceiling with 6.5 inches (16.5 cm) of space in every direction.
    Mark holes with a pencil using the mounting bracket as a template for Ring Pan-Tilt ceiling Mounting Bracket.
  2. Install the mounting plate with the UP arrow pointing opposite of your desired viewing direction.
Screw in the mount for installation of the Ring Pan-Tilt for the Indoor Cam Plug-in.

Installation materials with drill, wall anchor, and screws.

On stucco, brick, or concrete, use a 3/16 inch (5 mm) masonry bit to drill holes for the included wall anchors.

  1. Secure your camera to the mounting plate by sliding until you feel a click.
    Illustration of how to secure the Ring Pan-Tilt for the Indoor Cam Plug-in to the Mounting Bracket for ceiling installation.
  2. Plug in the power cable.
    Illustration of how to insert the power cable on the Pan-Tilt for the Indoor Cam Plug-in mounted on a ceiling.
  3. Anchor the power cable to the wall or ceiling with the included cable clip.
    Illustration of how to secure the power cable for the ceiling installation of the Ring Pan-Tilt for the Indoor Cam Plug-in.

Using the privacy cover.

Illustration of using privacy cover with the Ring Indoor Cam Plug-in with Pan-Tilt.

Removing the privacy cover.

Illustration of how to remove the Pan-Tilt Cam Privacy Cover.

Attaching the privacy cover.

Illustration of how to attach the Privacy Cover on the Ring Pan-Tilt Camera.

Last updated 1 month ago

Related Articles

    English (US)Change
    ©2025 Ring LLC or its affiliates
    |
    ||