Ring products and accessories in a bright and modern kitchen.

Ring Alarm Outdoor Siren Information

Enhance your Alarm Security System by alerting anyone passing by and deter intruders with the Ring Alarm Outdoor Siren when added to your Ring Alarm. When it’s triggered, the Outdoor Siren will sound a loud 100dB+ siren and flash a red strobe LED light to alert anyone passing by.

The Ring Alarm Outdoor Siren Mounts easily on the exterior wall of your home, with multiple battery and hardwired power options to choose from for your convenience. Turn on the Dusk to Dawn feature and let your Outdoor Siren tell everyone your home is protected by Ring.

Outdoor Siren Features

  • Dusk to Dawn
    : The Dusk to Dawn feature turns on the Ring logo light around sunset, and it turns off around sunrise.
  • Adjustable volume and duration
    : Customize when the siren sounds and how loud it will be to meet local laws.
  • LED lights
    : Turn the LED light on and off so that the strobe flashes only during alarm events.
  • Wired and wireless charging
    : Power your Ring Alarm Outdoor Siren from multiple sources, including a Ring Quick Release Battery Pack with a Ring Solar Panel for wireless charging (both sold separately).

Outdoor Siren Technical Specifications

Ring Alarm Outdoor Siren Technical Specifications
Dimensions
23.5 cm x 23.5 cm x 5.7 cm
Siren Frequency
Adjustable. Over 100 dB at 1 metre.
Power
* D Batteries* (included)
* Hardwire using Ring Plug-in Adapter (2nd Gen)
* Ring Quick Release Battery Pack (sold separately)
* Ring Solar Panel (sold separately)
Connectivity
Z-Wave (76m range to Base Station open air, line of sight)
Installation
Mount to flat walls
Operating Temperature
-20°C to 49°C, Weather Resistant
Setup Requirements
* Requires Ring Alarm Base Station (sold with Alarm Security Kit).
* Compatible with 1st and 2nd generation Ring Alarm devices and accessories.
Warranty
One year limited warranty and service included.**

*Battery life with included 3 x D batteries of up to 3 years, based on 90 total minutes of the security siren sounding. Battery life will vary based on device use and environmental factors.

**If you are a consumer, the limited warranty is in addition to your consumer rights and does not jeopardise these rights in any way. Use of Ring Alarm Kit is subject to the terms found here.

Outdoor Siren Setup

Before you setup your Ring Alarm Outdoor Siren, make sure you disarm your Ring Alarm to avoid triggering a false alarm event.

If you're planning to install your Ring Alarm Outdoor Siren with a Ring Quick Release Battery Pack, you should fully charge it first.

To setup your Outdoor Siren:

  1. Open the Ring app.
  2. Tap the
    menu (☰).
  3. Tap
    Set Up a Device
    .
  4. Tap
    Security Devices
    .
  5. Tap
    Sirens
    .
  6. Select
    Ring Alarm Outdoor Siren
    .
  7. Follow the in-app instructions to complete setup.

Choose a prominent location so neighbors, passerby and emergency responders can locate your home in case of an emergency.

Frequently Asked Questions

How loud is the Siren? Can I change the volume?

The Ring Alarm Outdoor Siren is louder than 100dB at 1m when set to the loudest setting. The Siren is adjustable and you can set it to five volume settings between silent and maximum volume. By default, the volume will play at the lowest volume and only play for 3 minutes.

Where can I mount the Outdoor Siren?

The Outdoor Siren is weather resistant (IP66) and can be mounted to most outdoor surfaces.  You’ll want to mount it in a spot where it can be easily seen by anyone passing by, it can easily reach your preferred power sources, and you can stay safe while mounting it on a wall. 

What are the Outdoor Siren Power source options? 

The Outdoor Siren comes with 3 D Batteries. You can also add:

You must add the Quick Release Battery Pack to use the Solar Panel, or optionally can be added when hardwired to cover all eventualities. Both options will keep the Battery Pack charged.  When you add an additional power source, Outdoor Siren will use this for power, and keep the D Batteries as a backup power source. 

Does the Ring logo on the front light up?

Yes, the Ring logo LED can light up using the “Dusk to Dawn” feature. By enabling this feature, the Outdoor Siren looks like a yard sign, letting everyone know your property is protected by Ring Alarm. In order to use Dusk to Dawn, you need to have an additional power source connected to the Outdoor Siren as well as the D batteries.  (If you only use the included 3 D batteries, Dusk to Dawn won’t be available for use.) 

What happens to the Outdoor Siren when the Alarm triggers?

When the Ring Alarm siren is sounding inside the house, the Outdoor Siren LED lights are flashing and the siren is sounding outside the house according to the preset volume and duration settings. You can adjust these settings depending on your preference, or to help remain in compliance with local laws. 

How far can the Outdoor Siren be mounted from the Ring Alarm Base Station?

The Outdoor Siren can be mounted up to 250ft, however your available range may be different due to the unique environment around your home. 

What if the Outdoor Siren location is too far from my Ring Alarm Base Station? 

You can add a Ring Alarm Range Extender between the Outdoor Siren and the Base Station to extend the Z-Wave signal. Range Extenders are available on Ring.com and Amazon.com.

Last updated 3 months ago