Safety and Compliance Information for Ring Car Alarm
IMPORTANT PRODUCT INFORMATION
SAFETY INFORMATION
READ ALL SAFETY INFORMATION BEFORE USING THE DEVICE. FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
WARNING: Improper installation could pose an obstruction risk and may result in serious injury, death, or property damage. Follow all installation instructions provided in this manual and in the Ring app. Do not use Car Alarm & Tracker without securely installing it to in your vehicle. You are solely responsible for mounting the device in compliance with applicable laws.
WARNING: Improper installation may pose an entanglement risk. Secure all cables when installing your device and ensure that there are no loose cables that can interfere with the operation of your vehicle. Ensure that no part of the device, including cable, intrudes into the footwell area of your vehicle. Failure to take these precautions could result in serious injury, death, or property damage.
CAUTION: If your vehicle is going to be parked for an extended period of time, we recommend that you unplug the device to avoid draining your vehicle’s battery
Do not expose your device to liquids. If your device gets wet, carefully unplug the device without getting your hands wet and wait for the device to dry completely before plugging it in again. Do not attempt to dry your device with an external heat source, such as a microwave oven or a hair dryer. If the device appear damaged, discontinue use immediately.
Use only accessories supplied with your device, or specifically marketed for use with your device, to power your device. Use of third-party accessories may impact your device’s performance. In limited circumstances, use of third-party accessories may void your device’s limited warranty. In addition, use of incompatible thirdparty accessories may cause damage to your device or the third-party accessory. Read all safety instructions for any accessories before using with your device.
Don’t expose your device to steam, extreme heat or cold. Use your device in a location where tempera- tures remain within the device’s operating temperature range set forth in this guide. Your device may get warm during normal use.
PRODUCT SPECIFICATIONS
Car Alarm
Model Number: 7AFYA9
Electrical Rating: 12V ⎓ 200mA
Operating Temperature Range: -4°F to 176°F (-20°C to 80°C)
FOR USA CUSTOMERS
Electronic Labeling for Car Alarm & Tracker Certification information regarding your device can be found electronically via the Ring app in the device’s Settings Menu under Device Health > Safety and Compliance Information.
Supplier’s Declaration of Conformity
Device Name: Car Alarm
Model: 7AFYA9
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party and Party issuing Supplier’s Declaration of Conformity:
Ring LLC, 12515 Cerise Ave Hawthorne, CA, 90250 U.S.A. www.ring.com / legal@ring.com
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a partic- ular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution, pursuant to Section 15.21 of the FCC rules, user changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with FCC radio frequency radiation exposure limits set forth for an uncontrolled environment. Information is on file with the FCC and can be found by inputting such Product’s FCC ID (which can be found on the device) into the FCC ID Search form available at fcc.gov/oet/ea/fccid.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other product antenna or transmitter.
RECYCLING YOUR DEVICE PROPERLY
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regula- tions. For information about recycling your device, go to www.amazon.com/devicesupport.
ADDITIONAL SAFETY AND COMPLIANCE INFORMATION
Additional safety, compliance, recycling and other important information regarding your device can be found at: www.ring.com/legal For Z-Wave technical information, visit ring.com/z-wave.
TERMS AND POLICIES
By purchasing or using the product, you agree to the Terms of Service found at ring.com/terms. For other applicable policies, visit ring.com/legal.
LIMITED WARRANTY
For information on the Limited Warranty, visit ring.com/legal.