Safety and Compliance information for Floodlight Cam Plug-in Mount

IMPORTANT PRODUCT INFORMATION

SAFETY INFORMATION

READ ALL SAFETY INFORMATION BEFORE USING THE DEVICE. FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.

Installation by a qualified electrician may be required in your area. Refer to your local laws and building codes before performing electrical work; permits and/or professional installation may be required by law.

Please consult a qualified electrician in your area if you are unsure or uncomfortable in performing the installation.

Do not cut any wires with factory installed wire connectors or remove the wire connectors.

CAUTION: To reduce the risk of electrical shock, DO NOT open the unit. Some products may have user serviceable parts and should only be opened in accordance with Ring repair instructions. Refer to customer support for any repairs.

CAUTION: Risk of fire. Do not install near combustible or flammable surfaces.

When this device is plugged into an electrical socket, unplugging the device will disconnect it from the AC mains supply. Only plug this device into an easily accessible electrical socket. Devices with a power cord must be located near the electrical socket.

If this device is used to power other devices, those powered devices must be located near this device.

Your device does not have an on/off button. If you wish to stop power from flowing into your device, unplug the power source.

CAUTION: For use only on a branch circuit protected by a Class A type Ground Fault Circuit Interrupter (GFCI). When used outdoors, install only to a covered Class A GFCI protected receptacle that is weatherproof with the power unit connected to the receptacle. If one is not provided, contact a qualified electrician for proper installation.

OTHER SAFETY CONSIDERATIONS

Your device can withstand outdoor use and contact with water under certain conditions. However, your device is not intended for underwater use and may experience temporary effects from exposure to water. Do not immerse your device in water. Do not spill any food, oil, lotion, or other abrasive substances on your device. Do not expose your device to pressurized water, high velocity water, or extremely humid conditions (such as a steam room). Do not expose your device or batteries to salt water or other conductive liquids.

To protect against electric shock, do not place cord, plug, or device in water or other liquids. If your device gets wet from immersion in water or high pressure water, carefully disconnect all cables without getting your hands wet and wait for them to dry completely before powering it on again. Do not attempt to dry your device or batteries (if applicable) with an external heat source, such as a microwave oven or a hair dryer.

To avoid risk of electric shock, do not touch your device or batteries or any wires connected to your device during a lightning storm while your device is powered. If your device or batteries appears to be damaged, discontinue use immediately.

Protect your device from direct sunlight.

Do not install when it is raining.

Use only accessories supplied with your device, or specifically marketed for use with your device, to power your device. Use of third-party accessories may impact your device's performance. In limited circumstances, use of third-party accessories may void your device's limited warranty. In addition, use of incompatible third-party accessories may cause damage to your device or the third-party accessory. Read all safety instructions for any accessories before using with your device.

WARNING: Small parts contained in your device and its accessories may present a choking hazard to small children.

CAUTION: When mounting this device in elevated locations, use precautions to ensure that the device does not fall and harm bystanders.

PROTECTION AGAINST WATER

To reduce the risk of damage to your device, follow these instructions:

• Do not intentionally immerse your device in water or expose it to seawater, salt water, chlorinated water or other liquids (such as beverages).
• Do not spill any food, oil, lotion or abrasive substances on your device.
• Do not expose your device to pressurized water, high velocity water or extremely humid conditions (such as a steam room).

If your device is dropped or otherwise damaged, the waterproofing of the device may be compromised. For more information concerning care instructions and the waterproofing of your device, please see www.amazon.com/devicesupport.

Your accessory should only be used in accordance with the instructions and intended purpose. Using your accessory in any way other than its intended purpose could cause injury to yourself, others, or property damage.

PRODUCT SPECIFICATIONS

Plug-In Mount for Cams (2nd Gen)

Model Number: LP-31L

Max Electrical Rating: 125V ~ 10A

Operating Temperature Range: -4°F to 122°F (-20°C to 50°C)

FOR USA CUSTOMERS

Electronic Labeling for Plug-in Mount Cams (2nd Gen)

Certification information regarding your device can be found electronically via the Ring app in the device's Settings Menu under Device Health > Safety and Compliance Information.

Supplier's Declaration of Conformity

Device Name: Plug-In Mount for Cams, 2nd Gen

Model: LP-31L

Responsible Party and Party Issuing Supplier's Declaration of Conformity:

Ring LLC, 12515 Cerise Ave, Hawthorne, CA 90250, U.S.A. www.ring.com / legal@ring.com

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution, pursuant to Section 15.21 of the FCC rules, user changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to www.amazon.com/devicesupport.

For USA Customers:

Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. Recyclability of products and packaging materials differs based on jurisdiction. For more recycling information, visit amzn.to/recycle.

Additional Safety and Compliance Information

Additional safety, compliance, recycling and other important information regarding your device can be found at: www.ring.com/legal

TERMS AND POLICIES

By purchasing or using the product, you agree to the Terms of Service found at ring.com/terms. For other applicable policies, visit ring.com/legal.

LIMITED WARRANTY

For US and Canadian Customers

For information on the Limited Warranty, visit ring.com/legal.